Want this question answered?
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
For a 1999 Mercury Tracer ( in North America ) ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A )
Tools needed to replace front brakes 2002 Ford Focus?
To replace brakes effectively, you need to know what type of brakes you have. In general, you will need a jack, new brakes, a wrench and Allen wrenches.
The only part that is needed to replace your 1997 Pontiac rear brakes is a break assembly kit. The brake assembly kit will have everything you need.
On the 93 escort, brother to Tracer, there was only a breather valve at the top of the transmission and fluid needed to be added by removing an access bolt OR it had a small yellow dipstick at the top of the transmission.
First, they're called BRAKES. Is that even a question? Yeah, replace them if needed. How's that?
first off are they disk brakes, (like the front one)? or drum brakes?
Assuming you mean "replace" the brakes, the brakes should be inspected for condition every time the vehicle is serviced and repairs, if any needed, should be done at that time.
To replace Melex golf cart brakes, you will need parts that vary depending on the model. In all cases, you will need the new brake shoes and possibly the calipers. You can replace these parts using standard tools including a Philips screwdriver.
To replace the brake pads on a 96 Grand Am, three tools will be needed. First, a C-Clamp, then a hex key to remove the caliper bolts, and a screwdriver to work the caliper free.
If your overhead compass on your 1998 Mercury Mountaineer does not work, the fuse could be what is wrong with it. Check the fuse and replace it as needed.