A T55 torx, 19 mm and 30mm socket, rachet, impact gun and impact chisel, torque wrench, a big hammer, a coat hanger, a hydraulic lift or jack and stands, and a bit of time, patience and mechanical knowledge.
what tools i need to change the brake shoes for a cavalier 2003
Make darn sure it isn't the tire first. Take the strut off, and have the bearing pressed.
Yes, provided you have the necessary tools and know-how to do it.
You need a 3/8 Allen wrench.
Due to the special tools and expertise required to press the hub and bearing from the steering knuckle,this job should be left to a professional mechanic.However the steering knuckle and hub may be removed and the assembly taken to an automotive machine shop or qualified repair facility.
No, no special tools needed, just common hand tools.
what tools u need to change a wheel bearing on a vw jetta 2003 jetta diesel
Struts on a car are a shock absorber that prevents the car from bouncing. A socket wrench is required to change the struts.
Unless you have access to a press or bearing removal tools this is not the job for at home. The bearing is pressed into the hub. You need to remove the spindle, press out the old and press in the new.
The PCV is usually located in the valve cover(s). They just slip into a rubber grommet; no tools required.
Not a DIY job. Specialized tools are required.
There really isn't any special locksmith tools besides a screwdriver and a hammer that would be required to change a lock on a door. You might need a shim in hold the lock in place if the lock is not centered.