The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
Front or rear?
you need to press out the bearing inside the hub assembly.
To replace the front bearing,jack up front and remove the wheel.Remove the brake caliber assembly and pads.The brake caliber guide ,held in place by 2 bolts that is bolted to the hub assembly has to be removed in order to remove the rotor.Remove the 3 bolts which hold the wheel bearing to the hub assembly,from the backside.Remove the 35mm axle nut using an inpact drill or strong arm.Tap the axle out of the assembly and the bearing assembly should come out from the front.
You have to buy the wheel bearing assembly.
Rear or front? rear
How do you replace spark plugs on a 2004 Sable - Taurus?
Front is easy, just replace hub rear is pressed in
The front wheel bearing assembly by Moog from Advance Auto Parts, $150. Labor 1 to 1 1/2 hours.
The front wheel bearing assembly is not repairable. A new wheel bearing assembly is replaced as a complete unit. Your local auto parts store can supply you with a new bearing assembly.
The front wheel bearings must be pressed into and out of the spindle/hub assembly. You will need to take the spindle assembly to an automotive machine shop to have this done.
YOU HAVE TO TAKE THE HUB ASSEMBLY OFF AND HAVE A SHOP PRESS THE BEARING,OR REPLACE THE HUB ASSEMBLY FROM A SALVAGE YARD.