Never mind answering the question. You need a 3/8 Allen to remove the calipers.
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
There are different tools for different calipers. Need to know what year, make and model you have and if you are removing a front or rear caliper.
With tools.
Calipers (or callipers) are tools, not living creatures, and thus they do not reproduce.
You will need new brake pads, a jack, tire changing tools, various wrenches and a large c- clamp. Jack the car up remove the wheel, remove the two bolts in the calipers, pull up calipers and set out of the way. Remove the pads, compress caliper piston with a c-clamp, be sure to have the brake fluid cap off the reservoir under the hood. Remove the c-clamp, replace pads and put back together in reverse order.
No, normal mechanics tools.
Tools needed to remove the 2005 Tahoe front bumper are 10 mm and 7 mm panel poppers.
a fork
There are two tools needed to remove a front hub from a 2003 Frontier. These include a screwdriver and a cone wrench.Ê
dial calipers. Tons of them
Your local auto parts store can sell you the simple tools needed to help you remove the windshield trim without damaging the trim or the glass.
You will need a 3/8" allen wrench to remove the anchor pins for the calipers and a "C" clamp to compress the piston back into the caliper.