Want this question answered?
that mean the clock spring is bad and you need to replace it is behin the steering wheel is a round plastic box.
the spring is in the water at the iceberg but you will need to get it!
No, the clock spring is a connector and is not considered an active sensor.
whats tools do i need to replace my rear struts on my 95 camaro
A clock spring is in the steering column and acts as a rotating connection so things like the horn, air bag etc will work in any position as the steering wheel rotates. If you look at the base of the steering wheel there are usually a couple bolts or screws that hold on the column cover if you remove it you may be able to see the clock spring, however removing it is much more involved! If you need to replace the clock spring it is usually advised to have a mechanic do it because of the air bag!
Changing a clock spring is not a job for a novice. you need to remove the air bag then the steering wheel then you can see the clock spring. next you need to remove the steering column cover which is easier if you unbolt the column and lower it. This will give you access to the wiring connections. Good luck
If you don't have the right tools don't attempt to change your struts. Getting the struts of is, easy but you have to have a spring compressor once you get them off also you need a workbench with a vice to remove the spring. Very Dangerous without proper tools.
i need special tool for replace rear coil spring 1995 camaro?
Some of the tools that would typically be included in a watch repair set are things such as stainless steel tweezers, spring bar tool, adjustable case opener and link remover. The kits usually also contain precision screw drivers and pin punches.
The attic fan broke down and I'm wondering what tools I would need to replace the attic fan with a new attic fan?
Common hand tools. Boxed end wrenches is what you need.
Basic hand tools should be enough.