0
What type of connectors have a round shape and use a bayonet-type locking attachment similar to a BNC connector?
Wiki User
∙ 12y ago
ST connectors
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you disconnect the electrical connectors on a '94 Honda cooling fan motor?
This may be a simple anwer, but you just unplug it. It is a locking connector, so you have to figure out where to push to unlock it, but it should not be too difficult. The connector is typically locked onto the housing of the fan assembly.
Which fiber optic connector is threaded to provide a screw-on locking mechanism?
FC
1987 Chevy Celebrity wire on transmission?
The square connector on the front of the transaxle is for the locking torque converter.
The locking ring on the cannon plug connector attatched to the low voltage cable is always on the male end?
true
What are the advantages for using an xlr vs a quarter inch cable connector in live sound applications?
XLR has a locking mechanism on it, can't short itself and is more robust connector in general.
Yes, you can use any cable with either connector. Yes, a non locking conenctor will pull out if you pull hard enough. We have not had to fix any plugs yet and we have been selling these for a little o?
Yes, you can use any cable with either connector. Yes, a non locking conenctor will pull out if you pull hard enough. We have not had to fix any plugs yet and we have been selling these for a little over a year now.
How do you replace a headlight on a 1997 Chrysler Sebring?
behind the headlight is a locking ring with a electrical connector going to it. the locking ring twists off. twist it counterclockwise about a 1/3 of a turn and it should just pull off. Disconnect the wire connector by gently pulling upward on the tab and pulling away from the front of the bulb. then take your new bulb, place the ring on it and place it into the headlight housing without touching the bulb if at all possible. twist the locking ring clockwise until it stops or 1/3 of a turn and reconnect the wire harness. there are some orientation grooves in the bulb and on the headlight housing to make sure the bulb is in the correct position. if these arent lined up you will not be able to twist on the locking ring. the electrical connector is also a shaped connector which will not allow you to install it improperly without extreme force to insert it into the connector.
How do you replace the front headlight bulb on a Mitsubishi galant es?
This question did not specify a year, as for the 2000 Galant ES it's fairly simple. You will need a flat head screw driver to remove the light bulb connector from the light bulb. The light bulb is held to the connector with a locking tab, you will need to use the screw driver to free the bulb from the locking tab on connector. Once free you can just pull the light bulb from the rubber housing. Replace with new bulb making sure you do not touch light bulb glass with hands (the grease of your hands sometimes shortens the lifespan of the bulb) snap in connector and you're done.
How do you change the headlight bulb in a 1995 Nissan Maxima?
1. Open the hood of your Maxima and locate the headlight assembly. Access to the bulbs is from the backside of the headlight assembly. 2. Remove the electrical connector from the back of the headlight bulb after pressing the locking tab to release it. Pull the connector straight off and set it aside. 3. Locate the locking ring on the back of the headlight assembly and turn it counterclockwise to unlock it. Remove the ring from the assembly pull the bulb out of the headlight. Discard the old bulb and insert a new 9004 halogen bulb into the headlight assembly. 4. Install the locking ring over the bulb and turn the ring clockwise until it locks in place. Plug the wiring harness connector into the back of the new headlight bulb, making sure it snaps onto the locking tab on the headlight.
The locking connector makes an ultra-reliable connection and the cable can not be accidentally pulled out of the headphones. The cable will stay connected to the headphones until you intentionally rem?
The locking connector makes an ultra-reliable connection and the cable can not be accidentally pulled out of the headphones. The cable will stay connected to the headphones until you intentionally remove it. The non-locking connector is very reliable, and has a snug fit into the headphone jack, but, if you were to trip or pull on the cable hard enough, it will detach from the headphones without damaging either the cable or the headphones. Either way, you will be able to use your headphones with the modified cable, or any other standard cable with a 3.5mm (1/8") plug on the end. The cable modification carries a 2 year warranty from The Sound Professionals.
How do you change Chevrolet truck headlight?
depends on the year, but on the newer models its super easy. open the hood. right above the headlite you will see an "L" shaped bar. its about 1/4" in diameter. that's the locking pin for the headlite. unlatch it and slide it to the side and out. you will be able to tilt the whole headlite forward, giving you access to the bulbs and their connectors. undo the connector on the faulty bulb, twist it out and replace. simple. no need for even reaiming.
How do you replace the fuel filter located on a 1991 Buick Century?
I have a 1990 Buick with 1991 registration; so this might help: The fuel filter is located along the fuel line toward the rear of the car on the driver�s side. Drive the car�s rear tires up on a pair of stands, and crawl under on the driver�s side. This filter is a small canister with special �clipper� type of connectors. The connectors work kind of like electrical connectors in that you have to compress the plastic locking part to allow the fuel line to pull out. I took a picture of these connectors and took it to my parts store. I was given a small compressor type of tool that was cheep, and it didn�t work. I ended up using a pair of pliers to compress the plastic locking tap while pulling on the line. The replacement filter is a canister with one side equipped with a short fuel line with one of these connectors. Along with the filter, you might buy another short fuel line with these connectors for the other end of the filter.
