0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is definition of fluctuating load?
The type of loads that vary continuously on the structure or a body are called fluctuating loads . for example traffic passing on a bridge applies different loads of varying nature.When load is fluctuating , the maximum stress level condition appears frequently . number of loading cycle is a count which tells that how many times the structure can bear maximum stress level.So fluctuating loads reduce the endurance limit.
Cotter joint is used transmit which type of loads?
Cotter Joint is used to transmit Axial Forces..... ie tensile force.
How does an electromechanical relay work?
All electrical relays consist of two circuits. 1.. A control circuit that utilizes a control voltage with a minimum current to switch a 2.. Power circuit requiring much greater current. The advantage of using this type of circuitry is that the switches or sensors that control large loads can be very small, {i.e. pilot switches, limit switches, sensors, etc.}, since they are the control switching device that can be capable of switching loads up to 600 amperes. This arrangement allows a very small wire size for controlling large loads. Without the use of relays, switches that control larger loads would be very expensive and occupy much more space.
How do you disassemble a gantry crane?
It depends upon the type, size, weight/capacity and location of the crane. For example - if you want to disassemble a 30t capacity gantry crane, you can disassemble it with a suitable 50t capacity tyre mounted telescopic boom crane or same capacity crawler crane........ First take the gantry to the suitable location where lifting beam can be rested on some supports, remove the canopy and then remove the wire rope from rope drums and lifting beam by electrically operating the rope drums separately. Now disconnect the electrical supply and properly support the vertical columns/legs separately, start disassembling from top - like disassemble: 1) electrical panels 2) rope drum, motor, gears, couplings, supporting frame, platform, railings etc. ..... (complete crab assembly can also lowered by using a heavy crane) 3) operator cabin, ladders 4) vertical columns/legs 5) finally the rail bogies .............
The actual mechanical advantage of a machine?
Humans are designed in a way to perform many amazing tasks, however we do and always will make loads of mistakes. This is can be due to a variety of reasons. Machines (when designed and thus built properly) don't suffer from such mistakes and depending on machine type they can outlast a human and do the job much more efficiently. But most machines require human influence to keep performing at their peak.
What is the difference between a shackle and a clevis?
A "clevis and pin" are a type of shackle, the clevis is the U shaped part, when you have both the clevis and pin together it would form a shackle. There are many types of shackle assemblies and many of them use a clevis. If you had a lifting strap with a loop on the end you would put the clevis on the loop, secure the pin, and now the shackle would be in place. I hope this makes sense.
How do you raise your testoserone?
by lifting weights heavy type exercise. also suppliments are available but theyre pretty expensive.
What is the difference between bow shackle and anchor shackle?
In most cases, people recognize bow shackles and anchor shackles as same, their names are used interchangeably. However, although the shape of bow shackle and anchor shackle looks similar, they are different type of shackles. Normally, the bowed part of bow shackle is much larger than an anchor shackle. Hopefully, this content could be helpful to you.
The fifth is a kind of octave?
A "Fifth Wheel" is a type of tow hitch for heavy loads. No, the fifth is not one kind of the octave.
What is the best type of electric motor for heavy starting loads?
The classic heavy starting load is a tram starting off from stationary, and for this the series-would dc motor is the preferred motor.
What type of cloud is often formed by fog lifting in the morning?
What type of cloud that is often formed by fog lifting in the morning?
How can heavy machinery be transported easily without lifting?
Transporting heavy machinery without lifting involves using specialized equipment and techniques designed to move such loads efficiently. Here are several methods: Flatbed Trailers: Use flatbed trailers with ramps to load and unload heavy machinery. The machinery can be driven onto the trailer, eliminating the need for lifting. Lowboy Trailers: Lowboy trailers have a lower deck height, allowing taller equipment to be transported without the need for overhead clearance. Self-Propelled Modular Transporters (SPMTs): SPMTs are a type of modular trailer with individual wheels that can be controlled independently. They are especially useful for transporting extremely heavy loads over long distances without lifting. Tow Dollies or Tow Bars: For smaller machinery, tow dollies or tow bars can be attached to the equipment, allowing it to be towed by a suitable vehicle without lifting. Hydraulic Platform Trailers: These trailers have hydraulic lifting capabilities, allowing the machinery to be driven onto the platform at ground level. Once loaded, the platform can be raised for transport. Rail Transport: In some cases, heavy machinery can be transported using specialized railcars. This is common for moving large equipment over long distances. Winching and Rolling: For shorter distances, heavy machinery can be winched onto a trailer or rolled onto a specialized transport platform. Air Skates or Air Casters: These systems use a cushion of air to lift the machinery slightly off the ground, reducing friction and allowing for easier movement across flat surfaces. Cranes and Slings: While not entirely avoiding lifting, using cranes and slings to lift the machinery just enough to slide transport skates or rollers underneath can make the process easier. Transportation Services: Utilize professional heavy machinery transportation services that have the equipment and expertise to move large loads without lifting. It's essential to assess the specific requirements of the machinery, the distance of transport, and the available infrastructure when choosing the most suitable method for transporting heavy machinery without lifting. Professional advice and services may be necessary to ensure a safe and efficient transportation process.
What is a boom truck and what does it do?
A boom truck is a long flatbed truck with a crane attached. They are often used for reaching inaccessible areas and lifting heavy objects. In some respects, it is a type of crane.
What was the name given to the low carts used for hauling heavy loads?
i think the answer you are looking for is a low-boy trailer. am assuming you mean the large tractor trailer type trailers?
What were shackles?
Shackles are steel connectors made from a body and a pin.A shackle, also known as a gyve, is a U-shaped piece of metal secured with a clevis pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. The term also applies to handcuffs and other similarly conceived restraint devices that function in a similar manner.Shackles are the primary connecting link in all manner of rigging systems, from boats and ships to industrial crane rigging, as they allow different rigging subsets to be connected or disconnected quickly. A shackle is also the similarly shaped piece of metal used with a locking mechanism in padlocks.Types:Bow ShackleWith a larger "O" shape to the loop, this shackle can take loads from many directions without developing as much side load. However, the larger shape to the loop does reduce its overall strength. Also referred to as an anchor shackle.D-ShacklesAlso known as a chain shackle, D-shackles are narrow shackles shaped like a loop of chain, usually with a pin or threaded pin closure. D-shackles are very common and most other shackle types are a variation of the D-shackle. The small loop can take high loads primarily in line. Side and racking loads may twist or bend a D-shackle.Pin ShacklesA pin shackle is closed with an anchor bolt and cotter pin, in a manner similar to a clevis. It is for this reason they are often referred to, in industrial jargon, as clevises. Pin shackles can be inconvenient to work with, at times, as the bolt will need to be secured to the shackle body to avoid its loss, usually with a split pin or seizing wire. A more secure version used in crane rigging features the combination of a securingnut (hardware) located alongside the cotter pin. Pin shackles are practical in many rigging applications where the anchor bolt is expected to experience some rotation.Snap ShacklesAs the name implies, a snap shackle is a fast action fastener which can be implemented single handedly. It uses a spring activated locking mechanism to close a hinged shackle, and can be unfastened under load. This is a potential safety hazard, but can also be extremely useful at times. The snap shackle is not as secure as any other form of shackle, but can come in handy for temporary uses or in situations which must be moved or replaced often, such as a sailor's harness tether or to attach spinnaker sheets. Note: When this type of shackle is used to release a significant load, it will work rather poorly (hard to release) and is likely to have the pin assembly or the split ring fail.Twist ShacklesA twist shackle is usually somewhat longer than the average, and features a 90° twist so the top of the loop is perpendicular to the pin. One of the uses for this shackle include attaching the jib halyard block to themast, or the jib halyard to the sail, to reduce twist on the luff and allow the sail to set better.
What is a shackles?
Shackles are steel connectors made from a body and a pin.A shackle, also known as a gyve, is a U-shaped piece of metal secured with a clevis pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. The term also applies to handcuffs and other similarly conceived restraint devices that function in a similar manner.Shackles are the primary connecting link in all manner of rigging systems, from boats and ships to industrial crane rigging, as they allow different rigging subsets to be connected or disconnected quickly. A shackle is also the similarly shaped piece of metal used with a locking mechanism in padlocks.Types:Bow ShackleWith a larger "O" shape to the loop, this shackle can take loads from many directions without developing as much side load. However, the larger shape to the loop does reduce its overall strength. Also referred to as an anchor shackle.D-ShacklesAlso known as a chain shackle, D-shackles are narrow shackles shaped like a loop of chain, usually with a pin or threaded pin closure. D-shackles are very common and most other shackle types are a variation of the D-shackle. The small loop can take high loads primarily in line. Side and racking loads may twist or bend a D-shackle.Pin ShacklesA pin shackle is closed with an anchor bolt and cotter pin, in a manner similar to a clevis. It is for this reason they are often referred to, in industrial jargon, as clevises. Pin shackles can be inconvenient to work with, at times, as the bolt will need to be secured to the shackle body to avoid its loss, usually with a split pin or seizing wire. A more secure version used in crane rigging features the combination of a securingnut (hardware) located alongside the cotter pin. Pin shackles are practical in many rigging applications where the anchor bolt is expected to experience some rotation.Snap ShacklesAs the name implies, a snap shackle is a fast action fastener which can be implemented single handedly. It uses a spring activated locking mechanism to close a hinged shackle, and can be unfastened under load. This is a potential safety hazard, but can also be extremely useful at times. The snap shackle is not as secure as any other form of shackle, but can come in handy for temporary uses or in situations which must be moved or replaced often, such as a sailor's harness tether or to attach spinnaker sheets. Note: When this type of shackle is used to release a significant load, it will work rather poorly (hard to release) and is likely to have the pin assembly or the split ring fail.Twist ShacklesA twist shackle is usually somewhat longer than the average, and features a 90° twist so the top of the loop is perpendicular to the pin. One of the uses for this shackle include attaching the jib halyard block to themast, or the jib halyard to the sail, to reduce twist on the luff and allow the sail to set better.
What type of activity is lifting?
Strength Activity ;)
