Acura Integra

What type of transmission fluid do you put in a 1994 acura integra ls?


Top Answer
User Avatar
Wiki User
2008-11-08 09:21:14
2008-11-08 09:21:14

If its a manual transmission any 5w-30 oil will work fine. However I personally use Honda's specific manual transmission fluid, available at any Honda dealership.

User Avatar

Related Questions

where is the flasher relay located 94 acura integra

its just like an oil change. find the big drain bolt on your transmission.drain it. Its safe to say that acuras only need their tranny fluid changed about twice in their lifetime.

The" manual" trans axle check/fill plug is located on the passenger side of the trans axle. use a box end wrench to remove it.

According the 1994 Acura Integra LS manual, recharge the system with Refrigerant HFC-134a (R-134a)

Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.

no the 1993 acura integra headlights will not fit the 1995 integra, 90-93 acura integra are more of a rectangle shape as to where in the 1994-2001 integras except the type r, have round head lights

No, it does not have ABS front or rear.

transmission fluid is in the transmission

I own a 1994 acura integra and the heater/air conditioning blower is not working, I can not defrost my windows and the heat does not blow. What is wrong and how can the problem be fixed.

No, the brake booster on a 1994 Acura Integra is different from a 1992 model. The 1994 model is a different generation and uses a different sized brake booster.

The back seats on a 1994 Acura Integra are mounted on bracket that attach to the body of the vehicle. Push the back of the seat down and loosen all the bracket bolts. Pull the seats out.

Fuse for cruise control on a 1994 Acura Integra is found in the engine bay fuse box. The fuse is located in the slot labeled CRUISE.

Where do I add transmission fluid to a 1994 Ford explorer with a manual transmission?

brake lights won't go off 1995 acura intergra

The clutch cylinder on a 1994 Acura Integra is bled by placing a tubing on the slave cylinder bleeder valve and placing the other end underneath brake fluid. Pump the clutch pedal several times and hold it down. Release the bleeder valve. Keep doing this process until bubbles no longer exit.

1.8L Dohc 142hp not very fast

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.