automatic? id its an auto then you need to go to an auto parts store and pick up some Transmission Fluid that says on it that its ok for Chrysler products, as some manufacturers require different kinds of fluid. if it says its for Chrysler, then that's the kind you need.
no
Type your answer here... Use ONLY ATF+3 OR ATF+4 transmission fluid, ASSUMING that you have the four speed automatic transmission. NEVER . . . EVER . . . use any other type of transmission fluid in Chrysler four speed automatics! For instance, Dextron will KILL your transmission, and Mercon will make the shifting hard and unpredictable! The viscosity (thickness, such as water versus syrup or honey) is CRITICAL on those transmissions, because the solenoid pack (electrically operated valves) modulate (pulse rapidly), for smooth transitions from one gear to another. If the fluid viscosity is wrong, the programming in the TCM (transmission control module, or transmission computer) is all wrong for proper shifting throughout all temperature ranges! For the exact same reason, most transmission additive products will also mess up the shifting! Be advised that, if you change the fluid by taking off the pan (which holds about four quarts on a 1997 Ply. Breeze), that does not change the fluid that is in the torque converter! I think the total capacity including the torque converter) is NINE quarts in the four speed automatics, in 1997 Ply. Breeze vehicles!
You must drop the fuel tank.
the most common cause is the fan module
Could it be a fuse or relay that prevents a 1995 plymouth voyager to cut off when you put it in drive?
It could be caused by clogged up front brake hoses.
Not antifreeze, that is special oil for the ac compressor with some dye in it to help trace refrigerant leaks.
It is Plies.
Commercial ply is stronger than normal ply. Waterproofed ply is waterproofed and commercial ply is stronger but not necessarily waterproof.
134 recharge for 1993 ply voygerI had to recharge mime a couple day ago. on the Plymouth voyager it has a color code outlet. red is high pressure and black is low pressure. about foue inches on the firewall is a black cap. screw it off, recharge it there.
Ply Board is a Board made out of Ply
Yes. A ply is a layer so 2 ply is double as strong as 1 ply