Hey Mark==I don't know what the torque rod is. Maybe a better description would help . Good luck JOe
Changing the brake pads on a Honda Accord is relatively simple. With a few simple tools, one can replace the pads in about one hour.
with tools
oil filter toolYou would need a oil filter wrench, a jack that's all you need to change the filter.
If you have to ask this question it would probably be best to leave it to a shop. It's not hard just hard work. It's bolted to the engine flywheel just like a cluth plate. Do you have the tools and all to remove the transmission and possibly the engine to get to the convertor?
Easy with the right tools. You can ghetto do it with a set of metric wrenches and small hands, though.
You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.
About 7 hours with all the tools and experience needed
You will need more then just a question or two, to change a head gasket, least to mention, some good quality tools, including a torque wrench, to reset the factory torques. The head bolts must be systematically torque in the proper sequence. My suggestion is spend a couple of bucks, about $15, and buy a Haynes or Chilton's Repair and Tune-up book at your local auto-parts store. both Haynes, and Chilton's, will show you step by step how to do it, as well as the tools required. Depending on the year of your engine, plan a weekend to accomplish this.
The tools needed to drop the gas tank of a 94 Honda Accord are screwdrivers, a socket set, and pliers. The tank is unbolted from the frame which allows it to be lowered from the vehicle.
With the proper tools and the correct torque.
The heater pipe is at the rear of the engine and the strut mounts are on each side of the engine compartment. These are not easy to repair and you need special tools and a front end alignment ' when you are through.
Click on tools and then options (the bottom of the menu) . It says 'homepage', and then you can change the website address.