Number 13 uses 10 AMP fuse
13 Amp My Iron uses this and I learnt this from AS physics on a task sheet
absolutely not
In the YUK an electric kettle has a 13 amp fuse., together with a 250 voltage. However, in the USA the voltage is lower and so ther fuse amperage may be different.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
If you do that the likelihood is that you will blow the 3A fuse quickly. There is a reason why the current fuse is what it is, because it is expecting currents around 80% of 13 A or around 10 A.
Fuse #13 or the 40 amp itm is the only forty amp
The 13 amp fuse with blow at the lower rate to the 15 amp fuse. And At 15 amp the motor is normally more powerful - check the wattage used in both
The difference between fuses is the current that they are designed to support. A fuse is intended as a safety measure to protect against overload. A 3 amp fuse should burn out if more than 3 amps is run through it, with some allowance for standard variance. A 13 amp fuse would burn out with greater than 13 amps. It is always a bad idea to use a fuse bigger than you need, because if your component is designed for a 3 amp fuse and you use a 13 amp fuse, there is a good chance you could damage your component with too much amperage because the fuse would not burn out at 3 amps, as was intended.
A table lamp a tv, hi
The Horn uses the same fuse as the Cig lighter plug. It is a 15 amp fuse.
Sure.If you want a fire, that is!AnswerNo. A 30A will cook the wire before it pops.