Depends on the year it was made.
Average 18-45 depending if the motor is cold or not, depending what oil weight you use.
A 350 Motor needs 5 qaurts of oil to function properly
a Chevy 350 engine at idle at operating temp will need at least 6 psi of constant oil pressure to maintain normal engine operation without doing damage to the motor, regardless of the type and weight of oil being used. when the motor is being run above idol, depending on the age and application of the motor, a 350 needs 12-15 lbs of constant oil pressure to keep the motor free of premature damage. tipically speaking if you have 6 psi of oil pressure on a cold motor and good oil, something is worn, damaged, or broken.
SAE 10W30
the weight of oil that is in the motor...10w-30 is more than enough, if the oil was changed and say 20w-50 oil was put in then your oil pressure is going to be higher...the oil is thicker or heavier
The weight of motor oil will depend on the size container. A gallon of motor oil weighs approximately 7.5 pounds.
Most mechanics agree; Mr. Goodwrench motor oil can be replaced with any non detergent motor oil of the same weight. The owners manual should give guidance as to the proper motor oil weight.
5 qts with a filter change.
You can use 10W-30 weight motor oil in your Mitsubishi. A heavier motor oil can be used in extreme climates.
Always use 10w40 ATV oil
The oil drain plug on a 1994 Chevy 350 is on the underside of the motor. Look for a bolt in the very center of the bottom of the engine.
I just did a head job on my 350 motor and now my oil is a little low and the water is darker