0
The smaller combustion chambers would increase the compression ratio a little, and the smaller valves would lower the torque curve a little, but also reduce the peak horsepower available.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Benefits of putting Chevy 305 heads on a Chevy 327?
Higher compression ration which can increase hp. I installed 49cc heads on my 305 instead of the 64cc and got a higher compression ration and a fair amount of hp gain.
What is the purpose of 327 heads on a 350 motor?
Most people think that they gain more power from putting a 327 head on a 350. unless you get a head that is a high performance head you are not changing much.
Will Vortec 350 heads work on vortec 305 engine?
Yes, they will work. but you wont gain power because the little 305 isn't putting out enough flow to keep up with the heads
What is the gain in putting 1 inch spacer on a Chevy 350 with 2bbl carb?
Without other modifications you will not notice the difference.
Where is the temperature door control motor in a Chevy S10?
Behind dash assembly. Dash assembly must be removed to gain access.
Will there be a power gain if you put 400 heads on a Chevy 350?
Probably not. 400 heads came with 1.94 intakes and 1.5 exhausts, and many of them had 76cc chambers. If the 350 has smaller chambers the 400 heads would lower the compression ratio, thus reducing power.
What does putting you on mean?
gain
Where is the heater control cable on a 2003 Chevy blazer?
It does not use a cable. The heater blend door is operated by a electric motor. The complete dash assembly needs to be removed to gain access to the unit.
What is a vortex motor?
Vortec motors were introduced by gm in the mid 1990's for better fuel atomization, which is when the fuel mixes with the air. With a better fuel to air mixture allows for a more efficient combustion in the cylinders = more power, better fuel economy. The actual change is in the motor heads themselves and the intake. Many people swap heads and intakes on older model chevys for an easy 20- 25hp gain.
Where is the windshield wiper motor mount on a 2002 Chevy suburban?
The motors, both for the front and the rear, are located at the very bottom of the windshield wiper fluid reservoir. To gain access to them, you have to remove the battery and the battery plate, along with several other bolts that you gain access to from under the car.
How much horsepower can a vehicle gain by installing aftermarket heads?
5-15+ depending on vehicle and type of headers.
Can you manually raise the window when the power motor is burned out in a 1998 Ford Explorer?
No, not without removing the door panel to gain access to the motor unit.
