Bad part, improper instillation, abuse by driver............
Installed incorrectly, driver who rides the clutch, clutch out of adjustment, weak pressure plate, that should have been replaced along with the clutch.
The clutch will have to be replaced. The pressure plate could possibly be resurfaced but usually it is as cost effective to replace the pressure plate.
depends on the clutch/ pressure plate combo but somewhere in the 1.5"-2" range
Hydraulic clutch on that model is not ajustable. You either have a bad clutch slave cylinder, Or the clutch and pressure plate needs replaced.
There could be a few reasons why a clutch pedal is stiff on a 1999 Accord. The clutch may be low on fluid or the clutch may need to be replaced.
because you didn't adjust the pressure plate
It sounds like you have a worn out clutch disc or the pressure plate is not applying enough pressure to the disc. Either way, it does sound like you are ready for a new clutch.
Your clutch is operated by a cable , it's not a hydraulic operated clutch on the 2000 Ford Mustang
bad clutch, bad pressure plate, throw out bearing, air in the hydraulic lines...etc
Make sure that there is power getting to the ac clutch when the switch is jumped. If the power is there then the clutch is bad and needs to be replaced.
Actually , the clutch on a 1996 Ford Mustang is not hydraulic , it is operated by a cable so there isn't any clutch fluid
Clutch repair for a 1992 Sierra will depend on the problem. Clutch systems consist of the clutch, pressure plate and a master and slave cylinder. These parts are not repairable, and the part that has failed will have to be replaced.