is the veha equiped with abs?
if it grinds only when you turn the car and nothings rubbing i would say it will be a cvjoint ,but to make sure that is the cause i would take it to a shop to have it check they usely don't charge to look at itok, thanks, however one garage thinks it may need a new gearbox, they suggested a gearbox oil change first. Is this possible, or are they just wanting more money?
is the veha equiped with abs?
Pressing on the accelerator increases engine rpm (revolutions per minute) which in turn increases wheel/tire rpm which increases vehicle speed.
Yeah, it sure is. What is that?
Upon pressing the accelerator pedal, the fuel/air mixture supplied to the engine increases, which results in a larger explosion and more power, thus propelling the vehicle at a faster speed
If the engine is revving up, then the transmission is having problems. If the engine is not revving, then check the linkage from the accelerator to the throttle body.
Crank the engine without pressing accelerator.
Examples; melting, boiling, sublimation, grinding, polishing, extruding, pressing, etc.
To my understanding, the saying is rightly "put the pedal to the metal", and would come from pressing a car's accelerator all the way down to the metal flooring. To my understanding, the saying is rightly "put the pedal to the metal", and would come from pressing a car's accelerator all the way down to the metal flooring.
Pressing on the accelerator or (revving) the engine will not harm it unless : 1- you over-rev it (keep pressing for a long time) 2- your car is very old and isn't that reliable 3- there is some dirt in the cars oil which will eventually harm it 4- the car's injectors are not clean or not operating in good way, this may lead to that one of the cylinders of the engine may stop working or maybenot operate properly
I assume you mean add fuel by pressing the accelerator. In which case the engine runs faster.
the recommended updates section of windows updates offers updates that improve your computers?
To rev the engine simply means pressing the accelerator down with the car in neutral as if you are preparing to take off fast for a race.
Driving a manual car involves several fundamental steps. Firstly, ensure the car is in neutral by pressing the clutch pedal and shifting the gear stick to the middle position. Start the engine and gradually press the clutch while shifting the gear stick into first gear. Slowly release the clutch while gently pressing the accelerator to start moving. To change gears, lift off the accelerator, press the clutch, shift to the desired gear, and then release the clutch while gradually applying the accelerator again. Rem