The license plate light fuse. It's a 10A fuse if I remember correctly. Sounds crazy, but I had no running lights and no lights other than warning lights on my instrument panel and it took me forever to figure it out. Apparently that whole circuit runs off of that one fuse. I have a 2000 Honda Accord, but I would assume it would be the same for a 1992.
not turnin them off ! put a screw in the hole were the brake switch meats the pedal in the little hole it will fix it
What would cause your fuse to blow when you turn on your lights on your 1993 mazda 323 the fuse to the tail lights on dash lights blow?
Next step would be to check the fuses
No battery.
There are several things that can cause your 1989 Honda Accord to stall on acceleration. The most common cause is a plugged or dirty air filter.
If turn signals are malfunctioning after a stereo has been stolen on a 1996 Honda Accord then there may be a problem with the wiring. The wiring flows into the same fuse and an open wire can cause the lights to malfunction.
Probably an issue with the parking brake switch.
The primary cause for the drive light to flash on a Honda Accord is a malfunction in the transmission. Error codes from the vehicle's computer can be read using an OBDII reader.
carborator
Yes but, wet with what ?
cause its a pice of s honda
A small hole in the fuse line would cause a gas leak on a 1994 Honda Accord LX. In addition, a hole in the actual fuel tank would cause a leak.