Try changing the plug wires.
The 1991 2.5 L 4 cylinder has a timing chain and ita bear to get in and out This motor has timing gears it doesn't have a chain or a belt.
If you have not ever done one it would still be a good idea to consult a manual!The easiest way to change the timing chain is to pull the motor out and remove the serpentine belt and then remove the timing chain cover. After you have done that you will be able to see the timing chain and all the gears and guides. Once you remove the timing chain and are ready to put the new chain on, locate the three colored links. Line these links up with the two cam gears on top and the crank shaft gear on the bottom. There are arrows on the gears to line the colored links up with. If they are not in the correct spot your motor will be out of time and your pistons and valves could collide. Put your timing chain cover back on and put your motor back in.If you don't want to remove the motor remove your right hand front wheel and remove the splash guard and serpentine built to gain access to the timing chain cover. this will be a tight spot to work in and will take although more work( in my opinion.
To change the timing chain on a Toyota motor, you need to first get a new timing chain. From there, take the old one off. You may have to remove things in the engine to do this. Put the new one on, looping it around.
At 80000 km if 271 motor.
it has a timing chain
the timing marks are on the cam and crank gears in the timing case.
what size motor is in your car is it the 307,350 V8 or the 252 V6 if it is the 307 or 350 it will be a timing chain and from what my book shows the 252 has a timing chain to
timing CHAIN
I have nissian 200sx and want to know if I have an interference motor or not before I change the timig chain
The 1998 Ford 5.4 Triton motor has a timing chain on it. The timing chain kits cost around $70 each.
No, it's a chain driven motor, no timing belt.
The 3.3 has a timing chain