0
A clamp meter measures the vector sum of the currents flowing in all the conductors passing through the probe, which depends on the phase relationship of the currents. Only one conductor is normally passed through the probe. In particular if the clamp is closed around a two-conductor cable carrying power to equipment, the same current flows down one conductor and up the other; the meter correctly reads a net current of zero.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How an amperage reading would be taken using a clamp-on?
Simply "clamp-on" the clamp of the amp meter to any electrical conductor supplying the equipment that you wish to check while it is in operation. It is better to use your clamp-on with each individual conductor one at a time.
How-to use the clamp-on meter Model GCM-600?
how to use the Clamp-On Meter Model GCM-600 to find the current of a DC power?
What would someone use a fluke clamp meter for?
A fluke clamp meter is used for electrical purpose by electricians. You can use them to measure things such as a large air condition currents. Different clamp meters have different features such as being able to measure motor inrush currents.
What do you use a clamp meter for?
The clamp part is for measuring amps via induction. You set meter to amps and clamp around only a single wire. Device you are measuring must be operating. This means you couldn't clamp around a lamp cord to a table lamp since the current induced in each direction cancels out. You would have to separate the wires. An electrician would carry a short extension cord with the wires already separated. Most often a clamp meter is use to checks amps in a breaker panel on the black wire coming from the breaker.
What do electricians use to test circuits?
Continuity tester, volt meter, clamp on amp meter, megger and ohm meter.
How do I use a clamp on amp meter?
Answer 1When electrical current flows through a wire [or any conductor[, it creates an electromagnetic field which the clamp on Amp meter is disigned to detect and quantify. The meter loop is hinged and movable in order to open the loop to allow the loop to be placed "around" a single conductor. It is important that the loop be placed around only one conductor as if there is more than one wire conducting, then the fields from multiple wires will interfere with the meters ability to operate.The meter will have a switch [usually rotary] to change scales, and unless you know the approximate current flowing through the circuit, you should first set the meter to the highest current scale setting, and then switch to lower current scales until the proper one is found.
What Do Amps Measure?
You can measure the electrical current with an amp meter. Amperage measures the current flow.
Use of burette clamp?
To clamp one in to keep it right up.
How would you determine the amperage drawn on each breaker in your electrical panel?
The only way is to use a meter, it does not have to be expensive. Radio Shack offers inexpensive meters. Simply "clamp" the meter around the circuit you want to test. Good Luck.
What would one use a Sekonic light meter for?
One would use a Sekonic light meter for testing the light when preparing to take photographs or make a film. They are an important tool in ensuring photos have the correct exposure.
How do you ohm out a motor?
To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
Would you use a meter stick to measure a chalk board?
Duha yes you would use a meter stik.
