To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
1.46 meg ohm
A shorted motor would read zero ohms. Note, however, that a meg ohm tester is not an appropriate test device to assess if the motor is shorted, because the difference between shorted and "operational" can often be just a few ohms - you need a low resistance test device - not a meg ohm tester.
expecto patronum! ~:)
There is only two test you can do measure on the Ohm scale the resistance at the power connection if there is a reading then it means it's not open but that's not an indication that the motor is Ok, then measure on the MOhm scale between the body of the motor and any of the power connections if there is a reading then the motor have a internal short, the best is to open the motor and inspect it for black spots on the coils your nose is the best test smell it
why armature resistance is very low as compare to field resistance in dc motor
The " Ohm " is. 1 ohm is the resistance across which 1 volt of EMF appears when the current through it is 1 Ampere.
1 mega ohm=______________ ohm?
200 ohm
10 ohm-m
take a 2 ohm bridge into 1 ohm
He did not come up with the Ohm, it was named after him many years after his death.
The ohm is a measurement of resistance named after Goerg Ohm. It was not "created".