answersLogoWhite

0


Best Answer

Start with a volt meter at the starter. Check to verify that voltage comes in on the BIG wire, and if that's working verify that you're getting voltage to the solenoid when someone tries to engage the starter.

If you have voltage to the solenoid when the keyswitch is in the "start" position, and the starter doesn't engage... it's the starter. If you're NOT getting voltage to the solenoid, check the keyswitch, wiring and the neutral lockout switch.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What you've got is a 1984 Chevy pickup and have power to everything even the lights work fine but it will not crank What should you be checking?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Hazard and signal lights stop working?

you should try checking the fuses and replacing the bulbs the fuses for thos lights should only be about a 10 or a 15


What is the definition of patrolling?

It means following a route and checking that everything is as it should be.


What size fuse would 87 Toyota pickup use for the radio and where is it located?

I need to change the fuse on the horn and hazzard lights on 1990 toyota pickup, what amp should I use?


Why blood for microfilaria is collected between 10pm-4am?

I have a swelling on my feet. my blood checking shows that everything is normal. So should I go for a checking for microfilaria ?


How do you take the tail lights off of a 1992 Nissan pickup?

If it is the same as the 1993 version, there will be screws/bolts in the back of the bed that you can unscrew/unbolt and u should be able to get at the tail-lights from there.


Why does turn signals hazard and brake lights not work on a 2004 Ford E350 van?

This is indicative of an electrical fault or problem causing the failure of multiple lights. The first steps should involve checking the switches and relays. The next steps are checking the switch assembly. Had


My brake lights on a 96 gmc sierra 1500 pickup just quit working along with the hazard lights but the running lights work fine What do you need to look for to fix it?

Check the fuse for the brake lights. It should be marked stop/haz on the fuse box cover.


Parking lights on 1994 Toyota pickup truck don't work. All other lights head tail blinkers dash etc. work fine. What should I look for?

The Switch may be bad. Check the bulbs for the parking lights. Check the fuses / relays for the parking lights.


The running lights on your 2003 Silverado pickup have gone out you can not find the fuse for running lights is not indicated on fuse panel Can anyone help us?

Should be in the fuse box under the hood on the drivers inner fenderwell.


If your 87 Nissan pickup drum and everything in the drum broke can you replace it?

Parts should be available at Auto Zone or Napa Auto parts


How do you get the disco lights on Moshi Monsters?

You'll find the disco lights to buy at one of the shops in Monstro City. Items rotate often so you should keep checking back if the lights aren't there right away. The Code: PUZZLEPALACE will get you an Animated Disco Floor.


What are the procedidures in checking your car for insperction?

All headlamps, tail-lights, turn signals, and brake lights must work without problems. The engine must have a certain EPA rating. No bulbs should be burnt out. The fuel emissions should be within the range the government allows.