If you are referring to the type of wrench that usually has an open end to tighten the bolt or nut and a point on the other end...the point is called a "drift pin" and is used to line up the hole that the bolt is going into. That style of wrench is called a "drift pin wrench".
This wrench is specifically used to put scaffolding together. One end is pointed so it will fit easily into some parts to be used as a lever.
Open end wrench, box wrench, gear wrench.
A box wrench has a closed end and is used to tighten or loosen nuts or bolts.
It was invented during WW1 .
That's correct. This particular wrench holds the nut or bolt head better than any other wrench.
This wrench is specifically used to put scaffolding together. One end is pointed so it will fit easily into some parts to be used as a lever.
To the right of the license plate, there's an opening. You stick the pointed end of the tire lug wrench in there, and rotate it counterclockwise.
Pointed Sticks ended in 1981.
A combination wrench has an open end on one end and a box end on the other. The 18mm designates what size nut/bolt the wrench fits.
Open end wrench, box wrench, gear wrench.
Open end, box end, with 6-point or 12 point box end, flare end, ratcheting end-wrench, Crescent (or aka adjustable), crowsfoot, pipe wrench and more
Adjustable Wrench , open end wrench , box wrench, socket wrench, monkey wrench
peak
What Americans call a wrench is called a spanner in England.
A box end wrench goes all the way around the nut, like a slice of a socket. An open end wrench grips just on two sides.
It's basically a pipe wrench with a point at the opposite end.
An open end wrench.