The primary rule to apply when using the high power objective is to always stay focused. By doing this, a person or team will be able to reach their goal much easier.
If you are using the oil immersion objective on a microscope, you must use oil to increase the resolution of the lens. These lens are used at very high magnification.
That is the oil lens. For suspension of microbes in an oil solution in which the objective lens is also immersed. Improves resolution.
A sample should be examined with low power first when observing any sample for the first time under the microscope. Now if you want to focus on one particular region in the sample then you can step it up to high power lens. Objective lens are not that expensive and good way to look at some simple tissue structures.
The high power objective lense will most likely break the slide. You need to use coarse adjustment on the low power objective lens.
because it allows you to find the part of the slide you want to see, then you can zoom in by changing focus to see the frame in greater detail. if you don't start in low power it is extremely difficult to move around the slide
So you do not crack the high power objective lens - this lens is very fragile and expensive.
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
So you don't crack the slide or damage the lens
You use the 3 objective lenses of a compound microscope to switch powers. There's LOW, MEDIUM, and HIGH power. With LOW power, you can magnify what you're looking at. With HIGH power, you can see things that you can't see with a naked eye.
So you don't crack the slide or damage the lens
You use the low power lens to find the specimen with a microscope. Once you have found the specimen on low power, you can switch to high power for greater magnification. Just be sure to use only the fine adjustment knobs for focusing on high power so the high power objective won't hit the slide.
The high power objective on a microscope is used anytime you need to achieve greater detail and magnification, and is often used when identifying cells. The high power objective is generally not used in teaching/learning labs as it is usually an oil immersion lens. Using oil means greater cleaning & care is required.
When viewing a specimen, you must always use the lower power objective lenses first. Low power lens gives the widest field of view and makes it easier to find the specimen when you look through the microscope. Finding the specimen at high power, without first centering it in the field of view at low power, is nearly impossible.
If you are using the oil immersion objective on a microscope, you must use oil to increase the resolution of the lens. These lens are used at very high magnification.
That is the oil lens. For suspension of microbes in an oil solution in which the objective lens is also immersed. Improves resolution.