When emerg brake off and car is on headlight stay on and controls don't work and you replaced all bulbs with new?
The questions is disjointed that it is impossible to answer....you need to be clear what is wrong and what you want The car is on? Are you sure it's not just the daytime running lights?
There are three main types of headlight bulb: Filament HID LED Filament are traditional bulbs, using a metal filament surrounded by halogen or xenon gas. Standard bulbs are normal, but headlight bulbs of up to twice the brightness, such as Osram Night Breaker are also available. HID use an arc of electricity, and are on some high end cars. Available as an upgrade, you need to add a ballast unit and a new bulb, so…
Why are the tail lights and license plate lights not working but the turn signals and brake lights and reverse lights are and you already replaced the bulbs and fuse?
Hi just bought an old BMW 3 series 1992 and needed to change the bulbs for the brake lights. Replaced the bulbs and checked fuses but can not get the bulbs to work. Could anybody help please?
How do you turn off light indicator warning on dashboard panel once you've replaced headlight bulb in 2003 ES300?
To remove the headlight assembly you need to remove the front bumper cover. There are two bolts and one stud with a nut that hold the headlight in. Two of the fasteners are behind the bumper cover. Took me about two and a half hours. Make sure the problem is the bulbs. When it happened to me the bulbs were ok. The real problem was the relay was not grounded. The ground is what the…
Why would my 97 mercury villager brake lights not work but dash and tail light come on when braking?
I would check the rear bulbs. I just had this issue and it ended up my brother had used the wrong bulb, and odd enough it caused the brake lights to stay on with headlights. When headlights were not on and you applied the brakes the dash would light and brake lights worked. Strange, HUH? I must admit before this revelation, I replaced headlight switch and brake switch, with no avail.
My tail lights and third brake light work on my 98 Explorer the two main brake lights do not Already replaced the brake light switch and all fuses appear to be intact What next?
Open the trunk....inside the trunk, on the back side are plastic covers that you can remove...there you will find your bulbs....find the brake light bulbs and remove them and replace them with new bulbs, then replace the covers. Don't forget about the 3rd brake light ...check it to see if new bulbs are needle. Also, if all of your brake lights aren't working...all at the same time...you might want to check your fuses. If replacing…
2000 odyssey brake and rear lights not working and will not go into gear also cruise and horn will not work. Can anyone help?
Check the fuse first, then the brake bulbs. When you press the brake, it senses the brake lights and let's you take it out of park. This happened to me - 2 brake lights burnt at the same time with one already gone, and I couldn't get it in gear. I replaced the bulbs, touched the brake pedal and she went into gear no problem.
1985 bronco brake lights dont work but all other lights do work you replaced brake light switch and bulbs?
There are two elements in some bulbs. One element is for the tun flash, the other is for the brake or taillight. I also failed to mention that they are single element bulbs. It's 1 bulb, single element. It controls both the brake light and the turn signal. The turn signals work fine on both sides but no brake lights when I apply the brake.
A Jaguar dealer is the primary place to find quality, factory direct headlight bulbs for a Jaguar luxury sedan. Major auto parts dealers also stock a wide variety of quality headlight bulbs. Autozone, Napa and other national chains are reliable places to find headlight bulbs for a Jaguar luxury sedan.
Brake light failure happens from a variety of problems, such as burned out bulbs, a short in the headlight wiring or a blown fuse. You can tell if the bulbs are out by a rapidly blinking turn indicator, a blown fuse by checking the fuse is the panel on the side of the dash, and check if its a short circuit by using a volt reader in the light socket.