All. For pedestrians, animals, etc.
When approaching scenes where you may have to stop suddenly.
If you look at the cover on the brake fluid reservoir, it should read DOT 3
Have your foot above, but not on the brake. Allows you to quickly apply brake.
look for a cover that says brake fluid, pull it off, and look on the side of the reservoir it should have a line that says full, fill it to there and done.
Driver side firewall it has a cover on it and should be full of fluid
It does have a switch and it is located under the dash on the driver's side (between the brake and gas pedals). There should be a cover over the componant that easily comes off. It does have a switch and it is located under the dash on the driver's side (between the brake and gas pedals). There should be a cover over the componant that easily comes off.
Should be a screw on either side - remove and cover should lift off
Yes you can use brake fluid in the hydraaulic clutch system the cover on the reservoir should be marked dot 3 brake fluid also check for leaks at slave cylinder at bellhousing.
How do you remove the brake light cover on a ford focus
how do you remove the brake light cover on a 1991 gmc tracker? Do you go from the outside or inside?
Look on the brake fluid reservoir cover, it should have the type of fluid required labeled on it. Most autos use dot 3 as I am sure your Impala does, unless it has a special brake system.
Be prepared to stop!