| --- add (enqueue) ---> ... | --- remove (dequeue) ---> |
By definition, First-in-First-out is the primary characteristic of being a queue. For any given time, the position of adding an item, or enqueue, is always from the left (directions shown as above, but they are just abstraction), and deleting one, or dequeue, is always from the right. The derived property or attribute of a queue is the adding position is always >= deleting position
When the positions of these 2 fundamental operations are at the same position, the queue is EMPTY. And we know there is no way to be less than EMPTY of a queue, right?! Thus, insertion and deletion positions of the queue are NEVER interchanged.
If they could be interchanged, then the thing you have is just a container, not a specialized container to fulfill First-IN-First-OUT (QUEUE). (the ones in the container are not served as the order they came in)
A double ended queue, or deque, is a queue in which you can access or modify both the head and the tail. The front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion). So when we need to insert or delete at both end we need deque.
In queue insertion takes place on rear end and deletion takes place on front end. INSERTION(QUEUE,N,FRONT,REAR,ITEM) :QUEUE is the name of a array on which we are implementing the queue having size N. view comlete ans at http://mcabcanotes.in/algorithm-to-perform-insertion-and-deletion-in-a-queue/
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer.
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer. A priority queue is a queue in which each element is inserted or deleted on the basis of their priority. A higher priority element is added first before any lower priority element. If in case priority of two element is same then they are added to the queue on FCFS basis (first come first serve). Mainly there are two kinds of priority queue: 1) Static priority queue 2) Dynamic priority queue A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
A double ended queue, or deque, is a queue in which you can access or modify both the head and the tail. The front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer. A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion). So when we need to insert or delete at both end we need deque.
In queue insertion takes place on rear end and deletion takes place on front end. INSERTION(QUEUE,N,FRONT,REAR,ITEM) :QUEUE is the name of a array on which we are implementing the queue having size N. view comlete ans at http://mcabcanotes.in/algorithm-to-perform-insertion-and-deletion-in-a-queue/
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer.
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer. A priority queue is a queue in which each element is inserted or deleted on the basis of their priority. A higher priority element is added first before any lower priority element. If in case priority of two element is same then they are added to the queue on FCFS basis (first come first serve). Mainly there are two kinds of priority queue: 1) Static priority queue 2) Dynamic priority queue A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)
Deque double ended queue
A queue is simply a FIFO i.e first in first out. In queue we've front and rear. Front is the initial or first location of the queue whereas rear indicates the last entry location in the queue. In the circular queue the location of front and rear will be the same IF the total space of the circular queue is utilized. Each element has its position no. for insertion , if we set the 5th element as the front element then after every insertion the ptr indicates the 5th element as front. in deletion, the fifth element is deleted every time it is the rear position. after deletion of an element the queue rotates and every time the rear indicates the 5th element of the circular queue. and every time the 5th location element is deleted.
The queue is a linear data structure where operations od insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. Whenever a new item is added to queue, rear pointer is used. and the front pointer is used when an item is deleted from the queue.
The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. Following are the types of queue: Linear queue Circular queue Priority queue Double ended queue ( or deque )
A queue is simply a FIFO i.e first in first out. In queue we've front and rear. Front is the initial or first location of the queue whereas rear indicates the last entry location in the queue. In the circular queue the location of front and rear will be the same IF the total space of the circular queue is utilized. Each element has its position no. for insertion , if we set the 5th element as the front element then after every insertion the ptr indicates the 5th element as front. in deletion, the fifth element is deleted every time it is the rear position. after deletion of an element the queue rotates and every time the rear indicates the 5th element of the circular queue. and every time the 5th location element is deleted.