My 97 A3 - has done 84000Ks - replaced rear pads with approx 1.5mm of depth left on each pad. Would recommend use of tool to screw slave cylinders back in to shoes prior to fitting pads - slaves have to be screwed in. At same time, wipe brake bleed nipple clean, place plastic hose over brake bleed nipple and sit other end in clean small jar - unip nipple as you screw slave in to allow excess brake fluid to escape slowly. Refit new pads.
I live some 400k from dealers and brake repairers - for issues of safety would recommend a brake specialist - cost a set of pads and 1 to 2 hours labour.
the emergency brake pads ARE the REAR brake pads.
How much does it cost to replace brake pads on a 1999 Mercedes Clk?
In CT USA, a garage would charge 1 hour labor to replace the rear brake pads on that Mountaineer.
take it to a brake specialist
Remove the rear tire and wheel. Remove the brake spring from the brake assembly. Remove the brake pads. Reverse the process to install the new brake pads.
Just remove the old brake pads and insert the new ones.
Lift the car on a vehicle jack, remove the tire, remove the brake shoe/caliper and remove the old brake pads. Put in the new brake pads, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
Front or rear?
What is a continent
Go to the Dealer!!!
How do you replace the front break pads on a Toyota corolla .
Lift the vehicle on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the calipers, and lower the car.