0
When try to start your Suburban it takes three or four times pushing on the gas then it starts what could be the problem?
Wiki User
∙ 15y ago
Need to check fuel pressure and fuel filter first. I think you will find your problem there.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What could make your 97 suburban accelerate when you put it in drive?
Pushing on the gas pedal
What could be the problem for coolant leaks under Chevrolet suburban 1996?
Intake manifold gasket
How do you reset a proportion valve on a 1988 suburban?
There is no need to reset it there is way to reset it if the valve is a problem it has to be replaced I think there is another problem but I have no way of knowing what it could be
Why does my mercury villager make a loud noise when accelerating that stops when you take your foot off the pedal?
If this is a general noise, it could be the transaxle. When you are accelerating, the engine is pushing the gears, and when you let go of the pedal, the vehicle starts to shift back down. If this is an engine noise, it could be predetonation or a valve problem.
My 1999 Acura tl starts ok but has no power when you accelarate Changed fuel pump worked for 3dys then problem is back?
If your 1999 Acura TL starts well but develops a problem when you accelerate, the problem could be with its transmission.
Your 2000 Plymouth starts but doesnt drive what could be the problem?
Try Putting It Into Gear!!!!!
What could cause a grinding noise on your 1998 Chevrolet suburban?
Sounds like a brake problem. Need to pull wheels and check the brakes.
Could your fuel filter be plugged if your 1999 Chevy Suburban is sputtering?
YES. Bad fuel pump pressure can cause that problem too.
What could be the problem if your car starts but turns off when you put it in drive?
possibly a problem with the torque converter locking up, or could be something as simple as a vacuum leak
Why is my 1999 gmc suburban jerking making a loud noise.?
If the 1999 Suburban noise is a sort of loud banging noise, the problem could be that the engine have jumped time. Jumping time would cause the noise and jerking in the engine.
What could be the problem when engine starts and runs when given gas but stalls at idle?
vacuum leak?
Engine starts then dies?
I experienced this same problem before too. The security system could be the problem. The imobaliser shuts of the car if it thinks there is a problem with the ignition(if it was hotwired).
