According to Kirchhoff's Current Law, the sum of the individual branch currents must be equal to the total current before (and after) it branches.
Load resistors are connected across the circuit to limit the current flowing through the load.
False.
In a parallel circuit voltage remains constant but current will vary with the number of branches (resistors). Remember that Current(amps)=V/R.
In parallel circuit the current through the resistors are different in values depending upon the values of resistors. But the sum of the currents across all the resistors will be equal to the current through the sourcgsvg bdjasuhafyuhda
This happens because the total parallel resistance is lower than the individual resistors that make up the group of parallel resistors. When you add another parallel load, the resistance of that parallel group lowers and as result increases the current for the rest of the circuit.
If two circuit elements (e.g., two resistors) are in series (a series circuit), the current has to pass first through one, then through the other. If they are in parallel, the current has a choice, through which of the elements it passes.
Current decreasesWhen voltage remains constant and resistance increases the current in the circuit will reduce.More informationV=IRwhere V is voltage,I is current andR is resistance.From the above equation,R=V/I, and hence resistance is indirectly proportional to current.Therefore, an increase in resistance would have the effect of decreased current.NB: this holds true only as long as the voltage remains constant.Another opinionHowever, this is only true in the case of a circuit connected in series.When circuits are connected in parallel, the opposite happens. If there is an increase in the amount of resistors in parallel, the total resistance of the circuit then decreases and the current increases subsequently.Yet another viewNo, that's not stated right.If more resistors are added in parallel - so that the circuit's overall total resistance decreases and its total current increases - that is NOT in any way the opposite of what this question is asking about...Let's make this crystal clear, so that there is no confusion: "an increase in the amount of resistors" is NOT the same as "an increase in resistance".So a parallel circuit behaves EXACTLY the same as a series circuit: if its overall resistance increases, the overall current going through the parallel circuit decreases AND if its overall resistance decreases, the overall current going through the parallel circuit increases.Actually, the second opinion is correctIn a parallel circuit, there are more branches to allow electrons back to the power supply, so current increases. With more resistors in a circuit, the overall resistance in a parallel circuit DECREASES.In a series circuit, current is the same throughout. So if more resistors are added, resistance INCREASES and so current DECREASES.
Two resistors in parallel are equivalent to a single component with a lower resistance than either of the pair. Two resistors in series are equivalent to a single component with a resistance equal to the sum of the pair, therefore a higher resistance. For a given potential difference, more current in total will flow through two resistors in parallel than through the same resistors in series.
If the two 5 ohm resistors were in series, then the current would be 1.2 amperes. If they were in parallel, then the current would be 4.8 amperes. Ohm's Law: Current = Voltage divided by Resistance RSeries = Summation1toN RN RPARALLEL = 1 / Summation1toN (1 / RN)
Current decreasesWhen voltage remains constant and resistance increases the current in the circuit will reduce.More informationV=IRwhere V is voltage,I is current andR is resistance.From the above equation,R=V/I, and hence resistance is indirectly proportional to current.Therefore, an increase in resistance would have the effect of decreased current.NB: this holds true only as long as the voltage remains constant.Another opinionHowever, this is only true in the case of a circuit connected in series.When circuits are connected in parallel, the opposite happens. If there is an increase in the amount of resistors in parallel, the total resistance of the circuit then decreases and the current increases subsequently.Yet another viewNo, that's not stated right.If more resistors are added in parallel - so that the circuit's overall total resistance decreases and its total current increases - that is NOT in any way the opposite of what this question is asking about...Let's make this crystal clear, so that there is no confusion: "an increase in the amount of resistors" is NOT the same as "an increase in resistance".So a parallel circuit behaves EXACTLY the same as a series circuit: if its overall resistance increases, the overall current going through the parallel circuit decreases AND if its overall resistance decreases, the overall current going through the parallel circuit increases.Actually, the second opinion is correctIn a parallel circuit, there are more branches to allow electrons back to the power supply, so current increases. With more resistors in a circuit, the overall resistance in a parallel circuit DECREASES.In a series circuit, current is the same throughout. So if more resistors are added, resistance INCREASES and so current DECREASES.
1 amp. formula E=IR
No. Parallel wiring just gives the current more choices of where it can flow. What matters is the number of resistors in the circuit.