0
Current decreases
When voltage remains constant and resistance increases the current in the circuit will reduce.
More information
V=IR
where V is voltage,
I is current and
R is resistance.
From the above equation,
R=V/I, and hence resistance is indirectly proportional to current.
Therefore, an increase in resistance would have the effect of decreased current.
NB: this holds true only as long as the voltage remains constant.
Another opinion
However, this is only true in the case of a circuit connected in series.
When circuits are connected in parallel, the opposite happens. If there is an increase in the amount of resistors in parallel, the total resistance of the circuit then decreases and the current increases subsequently.
Yet another view
No, that's not stated right.
If more resistors are added in parallel - so that the circuit's overall total resistance decreases and its total current increases - that is NOT in any way the opposite of what this question is asking about...
Let's make this crystal clear, so that there is no confusion: "an increase in the amount of resistors" is NOT the same as "an increase in resistance".
So a parallel circuit behaves EXACTLY the same as a series circuit: if its overall resistance increases, the overall current going through the parallel circuit decreases AND if its overall resistance decreases, the overall current going through the parallel circuit increases.
Actually, the second opinion is correct
In a parallel circuit, there are more branches to allow electrons back to the power supply, so current increases. With more resistors in a circuit, the overall resistance in a parallel circuit DECREASES.
In a series circuit, current is the same throughout. So if more resistors are added, resistance INCREASES and so current DECREASES.
What else can I help you with?
In a series circuit each device that is added to the circuit decreases the what?
Depends on the device. If it is a resistor and you have a fixed voltage then the circuit will obey Ohms law. Voltage = Current x Resistance. So if R increases by adding more resistors in series and the voltage is constant, the current will decrease.
A 22 k and Ohm and 12 k and Ohm resistor are connected in series across a 68 V source how is the voltage divided?
If the resistors are in series the voltage can not be divided, as it has to pass first through one then the other. The amount of current that flows through a set of resistors in series will be the same at all points and the total resistance in the circuit must be equal to the sum of all the individual resistors added together. In other words the 22k and 12k Ohm resistors are the sames as a single 34k Ohm resistor.
Is resistance in a series circuit equal to the largest resistor in the series?
No. The resistance in a series circuit is all the resistor values added together. eg. If two resistors were in a circuit, one was 10 ohms and the other was 30 ohms, the resistance in the circuit would be 30 ohms. Hope this helps!
What happens if you add more cells to a circuit?
If the cells are added in series, then the terminal voltage will increase, as would the internal resistance. If they are added in parallel, then the voltage would remain the same as for one cell, but the internal resistance would fall, and the available charge (in ampere hours) would increase.
What would happen to a series circuit if another bulb was added?
A: Adding any resistance bulbs or whatever in a series circuit will reduce current and will reduce total power. In this case the bulb will glow dimmer as any additional bulbs are placed in the series circuit. this is true if the same input source is kept constant.
How does the area of series resistors affect the overall resistance in a circuit?
The total resistance in a circuit with series resistors is the sum of the individual resistances. When more resistors are added in series, the total resistance increases because the current has to pass through each resistor, making it harder for the current to flow.
What are the differences between resistors connected in parallel and resistors connected in series, and how do these configurations affect the overall resistance in a circuit?
Resistors connected in parallel have the same voltage across them, while resistors connected in series have the same current passing through them. In a parallel configuration, the total resistance decreases as more resistors are added, while in a series configuration, the total resistance increases.
What happen to current when paralle resistor added?
For the individual resistor, the current is constant, regardless of any other resister that's attached to it in parallel. The current that results from all the resistors combined decreases as the resistance of one or more of the resistors increases.
How is resistance added in a series circuit?
Resistance in a series circuit is added by simply connecting resistors end-to-end. This results in the total resistance being the sum of the individual resistances. The current passing through each resistor in a series circuit remains the same.
What happens to the current through a series circuit as more resistors are added in series?
If the bulbs are in a series circuit the voltage drops at each bulb drops as additional bulbs are added. In a parallel circuit the voltage is constant no matter how many bulbs are added.
What is the apparent rule for total resistance when resistors are added up in series?
The total resistance in a series circuit is simply the sum of the individual resistances of all the resistors connected in that series. This means that if you have multiple resistors, you add their resistance values together to find the total resistance. Mathematically, it can be expressed as ( R_{total} = R_1 + R_2 + R_3 + \ldots + R_n ). The total resistance increases as more resistors are added in series.
What happens as a current flows through a parallel circuit?
if the circuit is a series circuit (all loads wired in a single line , one after the other ) then the current will be the same in any part of the circuit . if there are several different paths for the current to take , then each path will carry a different percentage of the total current . when each of these different current values are added together , they will equal the total supplied current.
Does you add the shorted resistors in finding the total resistance?
When resistors are wired in series, their resistances are added to find the total resistance. If they are run in parallel, or series-parallel, the formula is different
What is the effect on the total resistance if increase in resistors in series?
That depends ... in a very interesting way ... on whether they are connected in series or in parallel. -- If the resistors are in series, then the total resistance increases when you add another resistor, and it's always greater than the biggest single one. -- If the resistors are in parallel, then the total resistance decreases when you add another resistor, and it's always less than the smallest single one.
In a series circuit each device that is added to the circuit decreases the what?
Depends on the device. If it is a resistor and you have a fixed voltage then the circuit will obey Ohms law. Voltage = Current x Resistance. So if R increases by adding more resistors in series and the voltage is constant, the current will decrease.
What is the rule for the total resistors when resistors are added up in series?
You add the resistances together to get the total resistance in a series circuit. Say... R1=10 R2=12 R3=10 R123=32
A 22 k and Ohm and 12 k and Ohm resistor are connected in series across a 68 V source how is the voltage divided?
If the resistors are in series the voltage can not be divided, as it has to pass first through one then the other. The amount of current that flows through a set of resistors in series will be the same at all points and the total resistance in the circuit must be equal to the sum of all the individual resistors added together. In other words the 22k and 12k Ohm resistors are the sames as a single 34k Ohm resistor.
