Want this question answered?
One can obtain a total magnification of 400x while using an objective lens of 40x. Such a lens should be used along an eyepiece of 10x.
magnification.
The primary rule to apply when using the high power objective is to always stay focused. By doing this, a person or team will be able to reach their goal much easier.
All the threads can be in focus again using the high-power objective if a certain thread is focused using the control knob to make adjustments. The knob allows for very small changes to be made which will create a precise focus.
Less light
THE disadvantage of using high power objective is to
One can obtain a total magnification of 400x while using an objective lens of 40x. Such a lens should be used along an eyepiece of 10x.
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
Might add extra, but i really hope this helps! scanning objective - for locating the specimen on the slide (= low power objective) high power objective - magnifies the specimen to provide a detailed image coarse adjustment - used to focus the image when using low power diaphragm - used to adjust the amount of light passing through the specimen revolving nosepiece - holds the three objective lenses - it can be rotated to change the objective in use arm - holds the stage and the lens system - can be used to tilt the microscope (but not advised) substaGe lamp - provides a uniform illumination (more reliable than daylight !!)
The coarse and fine adjustment knobs can be used with the low power objective.
Using high power objective lense
Using high power objective lense
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
You use the low power objective lens first to get your sample centered in the field of view.
So you do not crack the high power objective lens - this lens is very fragile and expensive.
magnification.