1984
show you motor oil drain plug on a 2006 harleydavidson streetbob
There are four motor mounts. One directly in front of the engine is mounted to the carriage and has black rubber dampening, One directly behind the engine also mounted to the carriage and with rubber dampening. One on the passenger side directly above the axle mounted to the body and one on the drivers side attached to the body and transmission.
could be a ground problem. Try replaceing those rubber mounted groments
I understand you can use the same oil viscosity in both motor & transmission on the 2008 harley roadking!
motor is mounted inside the door
The foot-mounted version is also commonly referred to as B3 motor. The DR motor is available with a NEMA "C-face" flange . The "C-face" flange-mounted motor is a motor type with tapped holes in the flanged end shield.
To allow some movement, an engine directly hard mounted to a frame will break the steel from the torque, the rubber bushings allow a little movement and prevent vibration.
rubber band
Is the body of the wiper motor grounded? The motors are usually mounted on rubber and needs a grounding strap to the body of the unit.
Motor oil will soften the rubber bushings if allowed to absorb. Clean it up asap.
mounted to the bottom of the wiper motor
Blower motor resisters are generally mounted nearby the blower motor for cooling purposes.