0
Not a good sign! If the machine produces beeps, then you can note down how many beeps it produces and try searching for that number of beeps and bios (for example, if there are 3 beeps try searching for 3 beeps bios). The BIOS produces beeps if it can't boot the PC.
If there is literally no response (no lights and no sound), it's probable that the power has failed; try a different power lead and different mains socket. If it isn't the lead and the power socket works, then the PSU in the PC has probably failed and will need to be replaced.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How to play Nintendo switch games on PC?
You can't play Nintendo Switch games on a PC, you need a Nintendo Switch.That does not include games which started out on PC and were ported to Switch.
How to connect 2 PC through switch?
Connect a wire from each PC to an unused port on the switch.
What type of cable should you use to connect PC after connect switch to switch?
To connect a PC to a switch you should use a straight through UTP cable.
Differentiante between cross cabling and straight cabling?
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
How do you cannect PC to switch?
plug it in
Why you use cross cables?
To interconnect devices of same Port specifications (Same Fabric). For e.g. PC to PC, Switch to Switch.
How do you reboot e-machines computers?
Switch off the PC at the main power switch, wait about 30-40 seconds then switch the power on again, the PC should re-boot.
How can you connect your PS3 to your PC?
With a LAN cable and a switch
How do you switch Pokemon on Pokemon crater?
go to pokecenter and find the switch box to go from PC to team
Is it possible to link a cross-over connection to a switch or hub?
A crossover cable is used to connect a Hub or Switch to another Hub or Switch - or a PC to another PC.
What cable is required for a direct Ethernet connection between two PCS?
"RJ-45 Cross cable" is required for a direct ethernet connetion between two pcsbetween the same type of network devices (PC-to-PC, switch-to-switch, router-to-PC (Note: router and PC are LIKE devices, because both are DTE)) you use Crossover cable.to connect different type of devices (PC-to-switch, PC-to-router ..) you use Straight Through cable.
When you were switch on your PC the monitor was not on why?
The switch for the computer is separate to the monitor switch. To switch on the monitor, just press the button on the bottom right of your monitor (The thing you are looking into to see this answer).
