in the fender
turn signal switch needs replaced!
signal lights not working.
There are separate fuses for trailer signal lights in main fuse panel
When this happens, wiggle the turn signal stalk. If this fixes the problem, you need a new turn signal switch. Sometimes when you hit the brakes, the lights will come on. This is an indication of a bad switch.
you need to change the flasher can for the signal lights
The turn signal switch is directly under the steering wheel. the flasher...(the device that makes the lights blink and is activated by the turn signal switch) is usually under the steering column between the column and pannel
When the dash lights dim on the Nissan Pulsar SS 99 with the use of the turn signal, it is usually an indication of a bulb burned out in the turn signals. It can also mean that the flasher is bad and taking too much juice.
you need to buy a signal lights relay
Turn signal indicators are lights. The flash to tell you, or indicate, that a turn signal is on, and which way the lights are flashing.
it is the turn signal stalk. here is a good writup for repair. http://tss.likeabigdog.com/
Okay, first turn the signal on. The look to see if the lights are blenking If the outside lights work then the little light in the dash is out. If the lights outside don't work you either wire problems or you need to replace the light socket. Don't forget to check the signal flasher relay.
Signal Lights - 1912 was released on: USA: 9 July 1912