Want this question answered?
1. Turn ignition to RUN or ACC. 2. Momentarily jump pins in programming connector located in LR quarter panel area (Connector will not be plugged into anything, it will have two pins inside it, if you have to unlug it you have the WRONG one. Not all vehicles are set up from factory for keyless remotes) All doors will lock then unlock to confirm programming mode. 3. Press any button on first keyless remote. Door locks will cycle to confirm programming. 4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming. 5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Try looking in the trunk on the driver's side inside fender underneath the carpeting.
If you can't find programming instructions you can get a programming guide from iKeyless.com
Must be programed by a Dealer
Must go to a dealer
You should have programming instruction in the user manual.
There should a programming guide in the users manual
There should a programming guide in the users manual
http://www.autotalk.com/how-to/honda-element/honda-element-03-04-keyless-remote-programming-instructions.html
Each vehicle has it's own factory code
You should have programming instruction in the user manual.
There should a programming guide in the users manual