Unscrew all the little screws along the dash, including the one by the door and under the glove box lid. Pop it out and rotate it up. Radio is held in by 5/16" screws.
To install an amp to a factory radio of a 2012 Dodge Ram 1500, ensure that the amp bypass the harnesses.
The 2001 Dodge Neon standard radio is grounded to the radio retaining screws. When you install the radio simply attached the ground wire to the radio retaining screws.
No. The size of the factory radio is 1.5 din. In order to install a double din radio you will have to customize your dash (not easy) or purchase a custom dash (look on ebay). Unfortunately only a couple of people make the dashes so they aren't very cheap.
To install a radio you need a wiring harness for a 1994 Dodge (a Metra 80-1817 from Circuit City is what I used), and an installation kit (make sure it fits a 1994 Dodge Spirit). You'll probably need to splice the wires from the wiring harness to the stereo harness unless you can get find the right kind of connection somewhere.
See page 3 or 4 of this list and you will find how to remove an old factory radio from a 95.
take it to the custom radio installer, as it will require a small amount of cutting and trim removal from around the bezel! Had it done!
You buy the correct plug / harness adapter from auto zone , never cut the wires
Yes
install a radio
The fuse for the radio in a 2000 Dodge Avenger is 10 amp.
The 1998 Dodge Ram Van radio wiring diagram can be obtained from most Dodge dealerships. The radio wiring diagram can also be found at most auto-parts stores.
With the radio presets