www.partstrain.com or www.rockauto.com
720
A $720 fine in Oregon. Other states would have similar fines.
Four octaves is a range and does not specify how high or low any of the notes are. This may help. http://www.answerbag.com/q_view/720
NO!!! Do NOT EVEN TRY!!! at 180 degrees out your intake and exhaust valves have switched timing positions, IF you get it started you will burn the valves and the seats. This is the same for ANY V8 engine. (at 180 degrees at the distributor the crank has turned twice or 720 degrees on ANY four cycle engine, but the cam has only turned through half of a rotation or 180 degrees, 180 degrees on the crank equals 90 degrees on the distributor and the cam... not good no matter how you look at it) not only can this damage the valves you run the risk of ignighting the fuel in the intake manifold which at best may juse sound like a shotgun going off but at worse can start an engine fire, ALWAYS be positive that your static timing is correct before trying to start the engine... On a further note, depending on the year of the engine your timing pulse is detected by a magnetic sensor off the crank itself, so the above conditions shold not be possible, but I have seen shade tree mechanics destroy engines by doing what the manufacturers claimed couldn't be done.
Try LMCTrucks
You can find parts for your 1981 Datsun 720 King cab at most auto-parts salvage stores. Many of the parts are still available from your local Nissan dealer.
The vacuum hose routing diagram for this vehicle is located on the underside of the hood.
my 1982 720 2wd dont have power steering
look at the under hood diagram
i heard triton rims fit...
600 14 dunlup
ngk plugs are .31 to .35
On my pickup it seems like it is a 12 gallon gas tank
It would be a 185RLT tyre on a 14 x 5" Rim.
5.3 hours if RWD...6.0 hours if AWD
.006" intake and .010" exhaust