I think these had a small metal round knob somewhere by the key. The switch will be in the column if that's the case & you will have to pull the wheel.
Faulty hazard switch.
location of hazard flashers on 93 saturnsc2
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
How do you replace the hazard switch
Double check the wiring diagrams for your vehicle but it's probable the flashers and signals use the same relay to function. The wiring for your flashers will go through the hazard switch which is where the malfunction is. If you replace the switch your problem should be solved.
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
Try turning the hazard flashers on and off a couple times, see if that starts your signal lights working. If so, replace the hazard switch/module.
I believe the hazard flasher switch is in the instrument panel by the radio
You mean the one that controls the four-way flashers? It's on top of the steering column.
Have you ever stepped on the brake when the flashers are flashing and see how they stop flashing? So yes the circuit does go thru the flasher, so replace that and see.
yes
The hazard button alone can't be replaced. You will need to replace the complete signal switch which is called a multifunction switch.