One can purchase an oil filter wrench at the store's of, Pepboys, Autozone, Advanced Auto, and Napa Auto Parts. Depending on the quality and size the price can range from $5.00 USD to $15.00 USD.
Use an oil filter wrench such as the one in the link below. I use a similar wrench on my FLHTCU.
I have always used a variable strap wrench for oil filters. This way you can do many with one cheap tool.
You can purchase a Fram oil filter online from the Oil Filters Online website. Alternatively, you can also purchase these filters from retailers such as Amazon.
One can purchase a Fram oil filter from the 'Fram Catalog' website. It allows one to look up the parts they want including and oil filter. One can also get them from 'AutoZone' and 'Oil Filters Online'.
get aoil filter wrench and remove and put new one on.
You can sometimes remove the oil filter by hand, but usually you need an oil filter wrench. Most auto supply stores and some hardware stores have these. The basic one is a metal band attached to a handle which you wrap around the filter. Others look like big pliers and others fit on a ratchet wrench. I prefer the last one.
go to auto parts store and get the right filter for the Saturn then go to the filter wrench selection and find one that fits that is the style you like
It is an internal filter. It is located in the oil pan. It has a cap on the oil pan that almost looks like you can take it off with your hand. Chances are however you can�t. You can change it yourself with the correct size oil filter wrench. I wish I could tell you what size it was but I use a strap wrench to take it off. Most places sell the filter. Fram # is Ch8765. It is recessed into the bottom of the oil pan. There is a special tool to remove it. However there is one of those plastic filter wrenches, the ones that fit like a socket wrench on the end of a filter, that will fit the intrigue. when I find mine I will post part#. The filter is not the conventional cartrige filter most cars have. If you buy a new oil filter for your car you will see what i mean. You're going to want to purchase OTC's "GM Oil Filter Wrench", Part #6901 (~$20). This is a metal oil filter wrench specifically designed to work on 1999-2002 Olds Intrigue and 2001-2002 Olds Aurora. This wrench worked perfectly for me on my 2000 Oldsmobile Intrigue. However, you probably won't find this is stores, so you'll have to order it online. If you want a local, cheaper solution (~$5), Kragen sells a Size #4 wrench made by FloTools, which is made of some sort of plastic/graphite material. This wrench will probably suffice, assuming that your oil filter cartridge was tightened to the appropriate torque. However, if the cartridge was seriously overtightened (which most cheap oil change places do), the FloTools wrench might not be strong enough. I ended up warping the square socket side of the wrench (the side that connects to a ratchet) when trying to unscrew my oil filter cartridge.
With a oil filter wrench, see your auto supply store for the correct size They are a real pain, I've got one and a worse place would be hard to find. With a wrench that goes on the end like a socket or a pair of oil filter pliers. The filter drains on the axle and there is no way around that. You have to do it from under the car.
Turn the filter buy hand, then one quarter turn with the oil filter wrench. That's plenty. Make sure you put some new oil on the rubber gasket with your finger before screwing it on.
Answerits on the back of the engine in a very tight spot. When that car is raised on ramps or with hydraulic jack one can see it. To access the filter in one heck of a job and I haven't found one oil filter wrench that can easily open the filter. So good luck if you are planning to change oil and filter by yourself.
You can change the oil filter on your 2007 Kia by turning the oil filter to the left. It is best to use a filter wrench. Put the new filter on by turning it to the right.