You can find on eBay
To fill the brake fluid in a 2001 Honda Odyssey, you need to find the brake fluid reservoir and remove the cap. Fill the reservoir with the right amount of fluid and put the cap back on.
The brake fluid reservoir cap in a 2002 Grand Prix is located on top of the brake fluid reservoir. This is usually located on the master cylinder, on the top side of the firewall between the cabin and the engine compartment.
by unscrewing it.
My brake fluid reservoir is clear plastic with a thread on cap , there is no dipstick , there is a maximum fill mark on the white plastic reservoir
The reservoir is located on the master cylinder in a Mazda 626. To add fluid, simply remove the reservoir cap and pour fluid in.
DOT 4, check the cap for the reservoir, it is written on the cap.
To refill the brake fluid for a 1992 Acura, you need to remove the cap on the brake fluid reservoir. Add fluid until the dipstick measures full, or the line on the reservoir that says 'full' is touched by the brake fluid.
If you want to , you can buy a bottle of the correct type of brake fluid and " top up " the brake fluid reservoir yourself . Just make sure the cap area is wiped clean before removing the cap so no dirt falls in the reservoir . As the brakes wear , the brake fluid level will go down
open the cap on the brake mastercylinder reservoir and fill it to the top with Dot 3 brake fluid.
First it must be determined which type of brake fluid a 95 Ford Taurus uses. More than likely it is Dot 3. To add this fluid, find the brake fluid reservoir on the master cylinder. Unscrew the cap to the reservoir and replenish your brake fluid to the fill line. Screw the cap back on.
To add brake fluid to a 2006 Jetta, you will have to take the cap off the brake fluid reservoir. Fill to the appropriate level with DOT 3 brake fluid and screw the cap back on.
You open the hood, find the brake fluid reservoir, take the cap off and add DOT 3 brake fluid up to the full level.