check inertia switch
It don't have an egr valve!
Call the parts department at the Ford Dealer.
In the left part of the engine compartment there is a little twist off cap that looks like a bikes tire valve open that and connect the frion can to that.
Purchase a Haynes or Chilton's repair manual at any auto parts store. Here you will find all the valve and torque specs.
hellofellow escort owner there isn't one
It is safer to find out why the breaker tripped before the power is turned on. Turn off all equipment, then turn on the supply, then turn on each appliance one by one to find the culprit.
Actually, it's not that easy to find on this car....standing in front of the car, you have to look down to the right of the heatshield (in front of the engine block) and you will see an elbow in the incoming hose line. Simply pull up on this to expose or pull out the PVC valve. It's easy to switch out, just very difficult to find on this car.
The bleeder valve is on the front of the clutch housing. There is a metal line that goes from the firewall master cylinder to the slave cylinder. The metal line goes across the transmission. Follow it and you will find a bleeder screw with a rubber cover on it. Take the cover off to bleed the system.
Generally you will find a PCV valve somewhere on one of the valve covers, with a hose the connects to it.
where do you find the bleeder valve on a Ford Diesel F-250 6.0
Yango is in Mt. Lavaflow. You might need to find the lava flow valve before you can dig up the fossils.
How to find the reason for not starting when turning the key over on a 1993 Ford escort lx