0
Where can you find a rubber gasket for Ultrex 8 qt pressure cooker?
Wiki User
∙ 12y ago
Curries
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
When baking in a pressure cooker should we put rubber gasket?
You should not use a pressure cooker to bake in . You could use the bottom if you had to, but it will not build pressure without the gasket and the gasket should not be put in the oven. The gauge will not survive in the oven either. The older lids also had a lead blow-out plug and the newer ones, a rubber plug. Both will melt out in the oven.
Is there a replacement for Mirro gasket pressure cooker model?
The rubber gasket in the lid between the lid and the pot? Yes, it is availible. Anyplace that sells the cooker should have the gasket. Type Mirro Pressure Cooker seal in the search engine and I think that will give you a source.
I am looking for a rubber seal for the lid to my old presto pressure cooker. Is there anyplace locally I can get one?
Yes there is. Go to http://www.pressurecooker-canner.com/presto-pressure-cooker-parts.html and order the part you need and then it will be sent right to your door, they spealize in pressure cooker parts.
Where can you download instructions for tower 4300 pressure cooker?
I have a 4-quart SKY-LINE pressure cooker purchased in a mountaineering store in (probably) the early 1960. And yes, it still works very well. Unfortunately the rubber gasket that held the fusible plug has gone to the great kitchen in the sky. I have temporarily sealed the 5/8" hole with a rubber stopper, but that leaves only the pop-off valve to prevent over-pressurization. Can any one help me? John Geobuff@hotmail.com
Why has your slow cooker got a rubber stopper in the hole on the lid?
The main pressure relief valve in the center allows steam to escape once the pressure reaches a maximum volume. Should that relief valve be blocked with food particles the rubber safety valve has a slightly higher pressure tolerance and will pop off releasing pressure as a failsafe.
How is the Passenger window glass attached to the regulator on Toyota Highlander 2005?
It is pressure-fitted into a rubber gasket and held by a flexible mastic substance.
How to get a rubber ring 20 cm Ersatzteil-Nr 60 6880 9990 - 20372 2B for a pressure cooker?
je recherche le caoutchou de cet autocuiseur
Do you need any type of glue when installing a gasket on a urinal?
No, you don't if the gasket is rubber.
Why HDPE pipe is not able for rubber ring joint?
HDPE pipe can use a rubber ring, if the rubber ring is properly sealed with a steel gasket. The rubber ring must be placed in a groove in the pipe and then the steel gasket is placed on top of it.
Why do you boil lids before canning when they will be boiled during the process anyway?
Sometimes you boil the lids and sometimes you don't. If you are canning with either a hot water bath or in a pressure cooker, you do not need to boil the lids. If you are canning something that is put into the jar hot and is not going to be processed in the the bath or pressure cooker, you boil the lid to soften the rubber in the lid that forms the seal.
What do you lube the thermostat gasket with?
You do not "lube" the gasket with anything. If it is a flat paper gasket, you can use any shelac type sealer, but you don't have to as these will usually swell with contact with coolant and seal. If it is the kind that is a rubber ring around the thermostat itself, these require no sealant as pressure alone seal the housing to the motor.
What is the order of parts assembly for the thermostat on a Chevy 454. Thermostat first into the hole with spring up and the round rubber gasket on top of that with the neck on next?
The spring end of the thermostat goes into the engine. If you have the rubber ring gasket, the rubber ring has a slice on the inside of the gasket. Fit the rubber gasket around the outside of the thermostat before you set the thermostat in place. Be sure the thermostat and gasket are in place with the spring end facing the engine and install the thermostat housing, done.
