trying to replace crank position sensor but i have no ideal where to look it is 1993 infinity G20 could you help me find this sensor
the crank position sensor sends info to the ecu for position of the crankshaft in order to fire the correct amount of fuel and when to send the spark to the sparking pulg.the engine will not start.you can find the sensor mid engine near the crank.
It's a thread in style IAT sensor , so it has to be threaded into the upper intake manifold somewhere
where can i find the temperture sensor on a ford fiesta 1997
it depend on the year.but mostly it,s around the butterfly where the throttle cable hooks up.
where do you find horn fuse on 1993 e250 ford van
where can i find the location of oxgen sensor is the same as fuel sensor
right under the battery and right on top of the tranny. just look real deep in there and you will find it.
Locate the front wire on the distributer and follow. it will lead to the crankshaft position sensor.
The Throttle Position Sensor (TPS Sensor) is located underneath the air intake< right below the Idle Control Valve. If your new, Find where your throttle cable hooks up & its right there. Its on the throttle body. When you follow the throttle cable, you will see it go to a lever that turns a shaft. The TPS is on the opposite end of the shaft.
Code 12 displayed during self test, per Ford, takes you to test TP, for the throttle position sensor. It could be the failure of the throttle position sensor, idle speed or throttle stop adjustments, throttle shaft or linkage, and/or cruie control linkage.
Under the hood, find the area where the accelerator and transmission cables meet on the circular device near the intake. On the other side of that device should be the throttle position sensor.
"There is no camshaft position sensor on the 93 3.1. Only a crank sensor. It will be mounted on the back side of the engine block....driver side. You'll have to get under the car to see it. There are a couple of sensors mounted there. A knock sensor and the crank sensor."if there is no camshaft sensor for the 1993 3.1 Chevy... please explain why i can find the part number for that year and model car?Part # 2-96077???? i cant see why i can buy a part for a specific year and model car and the part doesn't exist?if the crank sensor relays the position of the crank... what relays the position of the cam without a cam sensor or distributor to relay to the PCM when to fire? im going to the dealership tomorrow... one of us has to be wrong.
I can not find where is located the position of sensor crank of 1999 nissan sentra 2.0 ( in what point is located in the motor)
Where can i find a picture of the engine temp sensor location on a 1998 ford escort zetec engine?
You can find the codes for the radio on the 1993 Ford Fiesta. The radio is in the middle of the dashboard. Turn the dials to find the radio station you would like to hear.
The shop manual would have it or at a Lincoln dealer parts department just ask the counter person.
It's in the distributor also called a hall sensor.
Follow the front wire on the distributor and it will lead to the crank shaft position sensor. hope this helps..
The EGR position sensor is on the top of the EGR valve. The valve is on the front, passenger side of the engine.
On the front of the engine. It is near the middle. The electrical wire can be traced to find it. Ford covered some of these under warranty. Ford did not cover my 1996 ; so I bought the part from a International dealer.
I was having the same problem with my daughter's escort. I replaced the cam position sensor and the problem stopped. Advanced Auto Parts will check the computer to find out the problem for free. I was having the same problem with my daughter's escort. I replaced the cam position sensor and the problem stopped. Advanced Auto Parts will check the computer to find out the problem for free.
there are several sensor, you can go to autozone.com and find out where they are
It is most likely the bearings on the pulleys or the crankshaft position sensor. If you search the web you will find write ups on the CPK chirp noise.
It comes as the entire gas pedal.