If it is a quad 4, the knock sensor is on the firewall side of the engine, at the transmission end of the engine, just below the exhaust manifold. It has a single lead and is about 2" in diameter and 1-1/2" high. Use a proper fitting socket or wrench to unscrew it.
where is the knock sensor located on 93 cutlass ciera
Where is the Knock Sensor located on a 1996 Oldsmobile Aurora?
were is knock sensor on 3.1 cutlass supreme
You can't, its done by the computer if you have a knock noise, replace the knock sensor. its locate on the back of the engine near the alternator.
The knock sensor is located on the 95 oldsmobile 98 with a 3800 engine under the midpoint of the heads.
First off, what size engine is in this vehicle? Usually they have 3.3L and the knock sensor is located at the rear of the block on the right hand side. It is round with a signal wire going to it. This would be looking up from the bottom of the car (on the hoist). macthemechanicca2001@yahoo.ca
On a 1999 Oldsmobile Alero, the knock sensor is located on the engine block. It may be bolted to the intake manifold, or to either side of the block.
LS does not have a knock sensor. GSR does have a knock sensor
The knock sensor detects spark knock or ping.
that the knock sensor does
Where is the knock sensor for a 99 pathfinder
knock sensor location