The modulator is located just above the starter on the side of the transmission, it has a vacuum hose attached to it. The solenoid is located in the transmission, you have to remove the transmission pan to remove it.
A 2000 Chevrolet Lumina has a modulator valve located on the side of the transmission. It is designed to control pressure inside the transmission and adjust shifting.
This transmission does not have a modulator valve.This transmission does not have a modulator valve.
Your transmission is most likely a 4T60E. If so, it has no modulator valve. This transmission is electronically controlled from the ECM. Line pressure, which is what the old modulator valve controlled, is now controlled by an internal pcm solenoid.
The exact location of the transmission modulator valve on your Ford Mustang is dependent upon the year of the Mustang. Most of the time the transmission modulator valve will be on the back of the transmission.
There is no modulator valve on the outside of this transmission.
No, it has an electronically controlled valve body,there is no modulator valve.
That year truck does not have a modulator valve on the transmission. it has a electronic transmission in it.
The solenoid are on the valve body inside the transmission.The solenoid are on the valve body inside the transmission.
The modulator valve uses hydrological pressure to shift a transmission !
That year did not use a modulator valve. The transmission is COMPUTER controlled.
If you mean the modulator valve for the transmission its on the side of the transmission. Under the car.New Answerthe 1987 ford crown vic with a AOD overdrive transmission does not have a modulator valve
according to a local dealer that model has no modulator valve on its automatic transmission sorry !
Typically, you can find the transmission modulator valve near the rear of the transmission. Its function is to control and regulate pressure.
The transmission modulator valve, On your 2006 Chevrolet Monte Carlo, is located on the top of the transmission. The valve should be labeled as such.
That transmission does not have a modulator valve on it. It is computer controlled to a point.
That year did not use a modulator valve on the transmission. That transmission is all computer controlled.
A modulator valve is located inside the case, in front of the modulator.
as far as I understand , it does not have a modulator. e4od are electronic. no vacuum shift modulator
The At modulator valve is located on the side of the transmission between the transmission tunnel. you may have to lower transmission to get to it.
A 1993 Jeep does not have a transmission modulator valve.
The vacuum modulator is on the front of the transmission. The modulator is a round valve and should have a steel line running from the top of the engine(next to the throttle body) down to the valve.
That year transmission did not HAVE a modulator valve. That year used a 4L60E / And the E stands for electronic transmission. NO valve. It is all computer controled.
That year model did not have a modulator valve on the transmission.
Starter solenoid: on the starter.EGR: on the egr valvetransmission: on the valve body in the trans.Starter solenoid: on the starter.EGR: on the egr valvetransmission: on the valve body in the trans.
In the transmission in front of the modulator