at the top
how to add coolant to 1991 lumina?
You can use any type of SAE certified coolant in your 2003 Mercedes-Benz. The coolant should have a temperature range of -25 degrees Fahrenheit to 120 degrees Fahrenheit.
The overflow resavour is where you add coolant
You should not mix colors or brands of coolant.
no cap, just the coolant tank, add to this to add coolant../
Add coolant to the full cold line on the coolant reservoir when engine is cold.
The coolant add/overfill jug is on the left side of the motor when your looking at it. Add coolant up the closest line towards the top, and only when the engine is cold.
Radiator. Remove the cap and add coolant there.
you add coolant untill it is full ?
You should add coolant with the engine off and cool, top off the radiator and fill the coolant reservoir to the cool or cold level. When the system is hot or running it will be pressurized and will be dangerous to open. You can however add coolant to the overflow reservoir at any time.
the rpm of a c240 engine is 2000rpm
Add it in the overflow tank up to the max line.
There is no such thing as Air Conditioning coolant.
were do I put coolant in mercedes 1994 c280
Coolant for the 98 Deville is added into the coolant overflow bottle. The side of the bottle should have low and high coolant markings.
add coolant to f250 system thru the overflow bottle this is a plastic bottle under the hood make sure not to add to window washer bottle
Under the right side of the false tank there should be a reservoir you can add coolant to that is connected to the radiator.
You can buy coolant that is premixed and is added to the radiator without mixing.
Add coolant to the reservoir. If the low coolant light still stays on, replace the low coolant sensor.
The remains of the old coolant can cause the new coolant to fail. Using the wrong type of coolant can also damage the engine.
The amount of coolant it will take to fill your vehicle is dependent upon how low the coolant level is. You can add coolant to your coolant reservoir. The reservoir will have an indicator of when the coolant system is full.
Remove the radiator cap when the engine is cool and add the coolant into the radiator or you can add to the coolant overflow bottle. DON'T remove the radiator cap when the engine is hot!!!
You add coolant to the radiator system and you add freon to the a/c by using the low side, suction side (larger hose).............