There will be a cap on the valve cover. Usually the drivers side, but, it varies.
The valve covers don't have a cap for oil unless it pose to go in where the breather cap is
One of the valve covers.
You need to be more specific on your question, add a little detail to it.
it is 355 + 250 = 605 ml
354 + 1 = 355
Need to know the year of engine, and what it is in. NEUTZ.
305 heads of course, 350 heads will fit for sure and possibly 400. obviously no big block heads will fit. a 305 with 400 heads gets you a little over 352. 350 with 400 heads is a 383. add and divide
By casting # and a motorbooks international Chevrolet small- block v/8 ID guide. If you can get the casting #and add it to your question Iwill look it up and tell you.
Yes. For street use you may want to use the head gasket as a template to add the steam holes.
it depends on what type of engine you are looking at. somehting small like an I4 will only add 5-10, but on a big block V8, it could get up to 30 hp.
A bare Chevy 350 engine block weighs about 200 to 250 pounds. When you add in the crankshaft, camshaft, headers, and the intake it is more like 500 to 550 pounds.
As long as it is not a tall deck, it should fit fine. If it is a tall deck, you'd need to add .400" shims under the collar to fit the small block.
It is currently 2021, so all you have to do is add 355 to 2021, which is 2,376 years ago.