answersLogoWhite

0


Best Answer

Drivers side, in the front of the engine, remove cap and add.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where do you add power steering fluid on a 1993 mark viii?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you add Power steering fluid in a 2007 dodge sprinter?

You remove the cap on the power steering reservoir, and pour fluid in until it is at the full mark.


How do you check the level of the power steering fluid of a 1997 Pontiac Transport 185hp V6?

When you remove the power steering cap, there is a measuring mark on the underside of the cap.


How do you replace mark viii power steering pump?

Drain the fluid from the power steering pump. Remove the power steering hose. Remove the wiring harness from the power steering pump. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.


What does a Exclamation mark on a 2002 mercury cougar means?

That means that you need power steering fluid!!


Where do you add power steering fluid on 99 jetta?

While parked on a level surface, and th engine is cold , locate the power-steering reservoir. The reservoir is connected to the power steering pump and is clearly labeled. Add approved fluid to just below the low-level mark.


Where does the power steering go in a 1990 Lincoln mark 7?

If you mean where does the fluid go, in to the power steering pump reservoir. It's near the front on drivers side with a belt around the pump pulley, look for a cap with "USE ATF" or "USE GENUINE FORD POWER STEERING FLUID"


Why would a Lincoln Mark VIII make a grinding noise in the steering?

There could be a problem in the steering linkage but most likely, the power steering pump is bad or low in fluid


How do you top up the power steering oil on a 2002 2.2 diesel vectra?

You can pour fluid into the power steering reservoir. Remove the top to the reservoir and fill to the full Mark on the side of the reservoir.


Does the 1998 Saturn sl2 have power steering?

assuming your vehicle is equipped with powersteering, yes. to find out for sure you will need to open your hood and look in engine compartment. there should be, in the upper left corner of the engine, a small black cap that says... Power Steering on it. it will be sitting ontop of a white colored fluid container. This would be your power steering pump. Twist the black cap and pull upwards. the cap will have a stick fastened to the bottom of it with a fluid level indicator mark. be sure the fluid is up to that mark, or very close to it. if not, you may need to purchase some power steering fluid.


How do you check the power steering fluid in a '91 Chevy caprice classic?

To check the power steering fluid on your 1991 Caprice remove the cap on the power steering pump fluid reservoir and check the level on the fluid level indicator. If the fluid is warm(about 170 degrees)the fluid level should be at the "Full Hot" mark. If the fluid is cool(about 70 degrees) the fluid level should be at the "Full Cold" mark.Always use the correct power steering fluid to avoid damage to the hoses and seals which will result in fluid leaks. It should be noted that the reservoir (pardon my spelling) is located under the alternator (On my '91 with the 305, that is) - So you can't do it while the car is running.....Kenny


What is the correct power steering fluid level on the dipstick?

Generally, there are two levels on a dipstick. With the car level and the engine hot, the fluid should be up to the "hot" mark. With the car level and cold, it should be to the cold mark.


Where do you add power steering fluid in a 1990 f150 5.0L?

Check owner's manual. If you don't have one copy and paste link below; www.fleet.ford.com/maintenance/owners_manuals-------------------------------------------------- Power Steering Fluid Check the level of the power steering fluid at least twice a year (i.e., every Spring and Fall).To check the level of your power steering fluid: 1. Start the engine and let it run until the power steering fluid reaches normal operating temperature. The power steeringfluid will be at the right temperature when the engine coolant temperature gauge in the instrument cluster is near the center of the NORMAL operating temperature range.2. While the engine idles, turn the steering wheel back and forth several times. Make sure that the cap assembly is installed at this time. 3. Turn the engine off.All vehicles except E-Super Duty: 4. Check the fluid level on the dipstick (which is highlighted in yellow in your vehicle). The fluid level should be between the arrows in the FULL HOT range, which is marked on the side of the dipstick, opposite the side marked FULL COLD. Do not add fluid if the level is within the FULL HOT range. 329 Power steering dipstick Power steering reservoir 5. If the power steering fluid is low, add fluid in small amounts, continuously checking the level, until you reach the FULL HOT range. Do not overfill. 6. When you are finished, put the dipstick back in and make sure that it fits snugly. If you check the power steering fluid when it is cold, make sure that the fluid reaches the FULL COLD range on the dipstick. The reading will only be accurate if the fluid temperature is approximately 50°F to 85°F (10°C to 30°C). 330 E-Super Duty vehicles: 4. Check the fluid level in the power steering fluid reservoir. The fluid level should be between the MIN and MAX lines on the side of the reservoir. 5. If the power steering fluid is below the MIN mark, add fluid in small amounts until the level is between the MIN and MAX lines on the side of the reservoir. Power steering reservoir If you check the power steering fluid when it is cold, make sure that the fluid reaches the MIN on the reservoir. The reading will only be accurate if the fluid temperature is approximately 50°F to 85°F (10°C to 30°C). 331 Use only power steering fluid that: qmeets Ford's Specification, such as MerconH Automatic Transmission Fluid. If the power steering fluid is low, do not drive your vehicle for a long period of time before adding fluid. This can damage the power steering pump. NOTE: Do not turn the steering wheel of yourvehicle with the engine off. It could force power steering fluid out from the reservoir cap or in extreme cases, it could unseat the cap.