Want this question answered?
similar to xf falcon
The Emerson electric motor is a very powerful motor, and is the best for personal use. The best thing to use a ACDELCO motor.
Check
To connect mechanical load to a motor, you couple it to the shaft of the motor.
Connect the sunroof motor with the sunroof motor retaining bolts. Connect the sunroof linkage. Connect the wiring harness to the back of the sunroof motor.
universal motor
it is so important because with out a motor driven vacuum it would be harder to vacuum clean also how would you clean without a vacuum cuz using a broom is hard
The motor in a vacuum cleaner is an electromagnetic device.
Although it is called a vacuum cleaner, it does not actually create a vacuum. Inside the cleaner there is an electric motor which drives a fan blade. This fan blows air out of the vacuum cleaner and this causes air to be drawn in to the cleaner at the other end. Thus the cleaner works by creating an air flow, not a vacuum.
Some of the air handling dampener motors are vacuum controlled and some have a small electric motor. If it's a vacuum controlled dampener, you probably have a vacuum leak, faulty vacuum diaphragm or disconnected vacuum line. If it's an electric dampener motor you have a bad connection, faulty feedback switch or faulty motor assembly.
That vacuum line connects to a nipple on the #3 carburetor just under the #3 intake. The other end connects to the vacuum advance mounted on the pulse generator at the rear of the engine. It should be routed under not over the fuel lines as they connect to the fuel pump.
The motor has to be replaced the most. Make sure you buy a high end vacuum that will last a long time. If you get a cheap vacuum the motor will burn out often and it is expensive to fix them.