Rear: CHOCK FRONT TIRES. Raise with floorjack on differential, Jackstands on axle or pinch welds on frame rails.
Front: E-BRAKE ENGAGED. Raise with floorjack on center of front axle (Not Differential), Jackstands on Pinch Welds on Frame Rails
My service 4 wheel drive switch was the VIC. Remove the VIC and re-solder the rear connector solder points. Their is comformal coating on the solder that you need to scratch off. I re-soldered all the connectors solder joints and after 3 years of error messages, have not had one.
The factory radio does not have an aux Jack.
the flat jack is under the back seat passenger side
First jack up the front wheels off the ground and check all suspension parts for play.
Under rear deck cover on top of spare tire.
On level ground, fill it to the bottom of the hole.
The jack is located under the rear seat on my 1997 Jeep Grand Cherokee.
it is about 6 feet tall
It is under the back passenger rear seat.
No it does not...it has an input for the optional CD Changer in the rear of the car.
If it is a full time 4wd it will not turn easily.
under the rear seat
The factory radio does not have an aux Jack.
Lift up the backseat.
the flat jack is under the back seat passenger side
Jack it up. Put jack stands or blocks under it to support it safely. Pry off the hub caps (if it has any). Take off the lug nuts (someone may have to hold the brakes on for this part). PRESTO CHANGO the wheels are off your Jeep.
First jack up the front wheels off the ground and check all suspension parts for play.
Under rear deck cover on top of spare tire.