Master cylinder reservoir should be under the hood at the driver's side firewall
The brake pedal has to be fully depressed for the stick to engage.
Check the Isuzu owner's manual for informational on the rear brake adjustment procedure. If the manual is not available to you, your local library may carry or you can seek advice from a certified auto mechanic.
Isuzu has a separate software system for its brake system. Usually, only dealers have it and they charge $$$ to scan it.
Between the two front seats where the hand brake and shifter are is usually what is called a centre console
just got a quote for $1000 in chicago. seems high, so I'm shopping it around.
It provides the vacuum to operate the brake booster and the shift on the fly system.
Just open the hook and look for the containers, in the top of the bottle is writen which fluid have to refill.
Cleaning will not help. The piston is going cocked in the bore. Rebuild or replace.
adjusting Isuzu rodeo brakes
I have 1998 Trooper. I called Isuzu and they were very helpful. Open the back door, above the cable that holds the wiring for the back light there is a screw. Unscrew it and then unscrew the 2 screws that are on the outside. My light was out on the driver's side but it is probably the same on the passenger side. When you are screwing it back together, do the outside screws first then the inside one. Good luck. It took me 5 minutes to do.
There is a tool you can get from Harbor Freight that is not too expensive but I just use a big C-clamp with the old brake pad in place. Works great and is free if you have the C-clamp.
Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm